User's Manual

Section 4
16
Auto-On
Once you have installed your Roady2 and the power has been turned on
using the power button , you will discover your Roady2 has been factory-
set to be turned off and back on again using the ignition key in your vehicle.
To change this factory-set condition and always power your Roady2 on and
off with the power button , select the “Auto-On” feature in the menu and
then select “Off.”
Auto-Off
You can set your radio to automatically shut off 60, 120, or 180 minutes after
it is turned on. This feature should be used if your vehicle continues to power
the cigarette lighter/auxiliary power after you remove your key, so if you leave
it on, Roady2 will shut down automatically after the time period you select and
will not drain your battery.
Factory Default
This feature lets you restore your Roady2 to the same settings as when you
purchased it. It will erase the presets, TuneSelect, memory, and stock ticker
data stored and reset the other features to the as-shipped configuration.