User's Manual

Installation

Mounting to the Dashboard or Console

If using the AMPs mounting

holes to fasten the Sportscaster

vehicle mount to your dash or

console, Bolt or screw the

Sportscaster vehicle mount in

place and proceed to step 3.

1. Remove the protective film

from one side of the supplied

double sided tape. Press

firmly to secure the tape to

the bottom of the vehicle

mount. (Figure 1).

2. Remove the protective film

from the remaining side of

the double sided tape. Place

the vehicle mount in the

appropriate location on the

vehicle's dash or console and

press firmly. (Figure 2).

3. Push the Sportscaster into

the vehicle mount until it

locks into place. (Figure 3). To

remove the Sportscaster,

push the release tab on the

top of the vehicle mount

upward and pull the Sportscaster forward.

4. Connect the DC Power, antenna and audio connectors (if required) to the appropri-

ate jacks. (Figure 4).

5. For best reception, place the XM antenna on the vehicle’s metallic roof, at least 6”

from any window or sunroof. It can be placed in the front, middle, or rear of the

roof. (Figure 5).

If the car is a convertible, you may mount the antenna on the metal trunk lid. It

should be at least 4” from the rear window. Ensure that the antenna and cable

don’t interfere with the opening or closing of the convertible top and the trunk lid.