User's Manual

Installation

Mounting in the Home

1. Push the Sportscaster into the

home mount until it locks into place.

(Figure 1). To Remove the

Sportscaster, push the release tab

on the top of the home mount

upward and pull the Sportscaster

forward.

2. Connect the AC Power, antenna and

audio cable (if required) to the

appropriate jacks. (Figure 2).

3. Place the antenna on a window or

an exterior wall so that it points

south. (Figure 3).

Installation

Using the Wearable Kit

1. Attaching the battery to your

Sportscaster is simple. First, install

battery by lining up the battery

with the slots in the back of your

Sportscaster. Next, slide the bat-

tery into place until it is locked.

(Figure 1). For a complete charge,

the battery must be charged for

approximately 3 hours. The battery

life is approximately 4 hours.

2. To attach the belt clip onto your

Sportscaster, push the

Sportscaster into the belt clip until

it locks into place. (Figure 2). To

remove the Sportscaster, push the

release tab on the top of the belt

clip upward and pull the

Sportscaster forward.

3. Plug the connector of the integrated XM antenna headset into the connectors

with the wire exiting upwards as shown in (Figure 3).