User's Manual

Installation

Mounting to the Windshield

1. Insert the 2 suction cups into

the larger side of the holes

on the vehicle mounting

bracket and slide outward to

lock in place. (Figure 1).

2. Loosen the thumb screw and

rotate the Sportscaster

vehicle bracket to the

appropriate angle for your

vehicle's windshield.

Retighten the thumb screw.

Place the suction cups on the

Sportscaster vehicle mount in

an appropriate location on

your windshield. Press firmly

to secure the Sportscaster in

place. (Figure 2).

3. Push the Sportscaster into

the vehicle mount until it

locks into place. (Figure 3). To

remove the Sportscaster XM

Satellite Radio Receiver, push

the release tab on the top of

the Sportscaster vehicle

mount upward and pull the

Sportscaster forward.

4. Connect the DC Power, antenna and audio connectors (if required) to the appro-

priate jacks. (Figure 4).

5. For best reception, place the XM antenna on the vehicle’s metallic roof, at least 6”

from any window or sunroof. It can be placed in the front, middle, or rear of the

roof. (Figure 5).

If the car is a convertible, you may mount the antenna on the metal trunk lid. It

should be at least 4” from the rear window. Ensure that the antenna and cable

don’t interfere with the opening or closing of the convertible top and the trunk lid.