User's Manual

Settings
Settings
69
Settings
68
Settings
DRAFT DRAFT
FM Modulator
Set the FM frequency that inno
transmits on.
Turn the FM modulator on or off
manually – or automatically when
inserted into a home or car cradle.
Adjust the volume level of the
FM transmission.
FM Frequency
Your inno contains a built-in FM modulator (or FM transmitter) that allows you to listen to
whatever your inno is playing using an ordinary FM radio. All you have to do is set your inno
and the FM radio to the same frequency.
1. Dock inno to the home cradle or car cradle.
2. Find an unused FM frequency on your FM radio. Note that FM frequency.
3. Select XM ➝ Settings ➝ FM Modulator ➝ FM Frequency.
4. Use the up and down arrow buttons to choose the same FM frequency as in step 2. You
should hear XM programming over your FM radio when your inno and radio frequencies
match.
5. Press the XM button to confirm your selection.
FM Mode
Choose one of these settings:
AUTO FM transmitter turns on when you dock inno in the car or home cradle. FM
transmitter turns off automatically when you undock inno. inno always
returns to AUTO when powered off.
ON Turns on the FM transmitter. You must plug in the earbud or travel power
cable.
OFF Turns off the FM transmitter. Make sure you select this option when you’re
on an airplane.
eng_usergd.qxd 2/21/06 2:28 PM Page 68