User's Manual Part 2

3EM21522AAAA Maintenance
Issue 1, March 2008 DTR-0200-SA-SIRIUS
6-9
STEP PROCEDURE CONT.
b ALARMS
• ALARMS>Alarm Properties
(set SIRIUS specified alarm traps ON or OFF for NMS alerting).
c NMS USERS
• NMS USERS>User Properties
Auth Type = SHA
Priv Type = DES.
d SYSTEM PARAMETERS
• SYSTEM PARAMETERS>Network Parameters
(reset per SIRIUS network manager information).
• SYSTEM PARAMETERS>SNMP Parameters
(set SNMP Traps to ON and enter SNMP server IP address).
• SYSTEM PARAMETERS>Heartbeat Time
(set time for minimum NMC interference; Heartbeat will display
on Alarms
Log).
• SYSTEM PARAMETERS>System Reset
At completion of System Parameters changes, perform System
Reset to allow c
hanges to take effect.
e CONFIG
• CONFIG>Repeater Operating Mode
(set operating mode to Broadcast).
14 Perform repeater operational test as described in the Turn-Up section
of this manual.
15 Coordinate with NMC and return repeater to remote operating
condition.
a To Close Front Door
Secure two door latches then tighten two locking screws.
b To Close Rear Door
Secure two door latches then tighten one locking screw.