SIRPNR2C PIONEER COMPATIBLE SIRIUS SATELLITE RADIO TUNER Installation Guide
Congratulations on your purchase of the SIRPNR2C– the Pioneer Compatible SIRIUS Satellite Radio Tuner! Your new SIRIUS Tuner is designed to work with all Pioneer headunits that are designated to be “SAT RADIO READY” for any Satellite Radio provider. Contact Pioneer or SIRIUS for model compatibility. What is SIRIUS Satellite Radio? SIRIUS is 100 channels of the best entertainment and completely commercial-free music for your car, home or office.
Table of Contents Package Contents .............................................................................................. 3 Warnings and Cautions ..................................................................................... 4 Installation .......................................................................................................... 6 Mounting the Tuner ............................................................................................ 6 Installing the Antenna ...........
WARNING This symbol means important instructions. Failure to heed them can result in serious injury or death. DO NOT OPERATE ANY FUNCTION THAT TAKES YOUR ATTENTION AWAY FROM SAFELY DRIVING YOUR VEHICLE. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location before performing these functions. Failure to do so may result in an accident. DO NOT OPEN, DISASSEMBLE OR ALTER THE UNIT IN ANY WAY.
CAUTION This symbol means important instructions. Failure to heed them can result in injury or material property damage. HALT USE IMMEDIATELY IF A PROBLEM APPEARS. Failure to do so may cause personal injury or damage to the product. Return the unit to your authorized retailer or nearest service center for repairing. INSTALL THE WIRING SO THAT IT IS NOT CRIMPED OR PINCHED BY SCREWS OR SHARP METAL EDGES. Route the cables away from moving parts or sharp pointed edges.
Installation It is recommended that prior to starting the installation, you thoroughly read this manual and follow the guidelines listed below: Consider the mounting location carefully. You should make sure that you avoid the following: • Any location where the tuner is exposed to moisture. • Any location where the unit is exposed to extreme heat. • Any location that would interfere with moving parts on the vehicle or hamper driving.
3) Remove the remaining protective tape from the adhesive, carefully position the antenna with cover/tail and apply pressure to secure to the vehicle. Cable Cover/Tail • For SUVs, minivans and five-door vehicles, bring the cable into the vehicle under the rubber molding for the tailgate, and continue under the interior trim. • From the trunk, carefully route the cable to the location of the SIRPNR2C and plug the SMB connector onto the unit.
Wiring and Cable Connections Antenna Input Connect the right-angle SMB connector from the antenna. Push firmly to attach. IP-Bus Output Connector Use the supplied IP-BUS cable to connect to the Pioneer Headunit or Audio Processor – See “System Connection Examples” for more specific details. IP-BUS Input Connector Connect to optional Pioneer audio equipment like CD Changers - See “System Connection Examples” for more specific details.
Antenna (21’ cable) - Mount on Roof of Vehicle Power Harness Black – Connect to Chassis Ground OUT Right-angle IP-Bus Connector FILTER & FUSE BOX IN Right-angle SMB Connector Yellow – Connect to Battery Positive (+) To access the fuse, remove the top cover of the in-line filter/fuse box 2.
System Connection Examples System 1: Pioneer Headunit and SIRPNR2C Optional Pioneer SAT RADIO READY Headunit (IP-Bus CD Player or Multimedia Headunit) System 2: Pioneer Headunit, DVD/CD Changer and SIRPNR2C Optional Pioneer SAT RADIO READY Headunit (IP-Bus CD Player or Multimedia Headunit) Optional Pioneer CD Changer 10 SIRPNR2C Installation Guide
System 3: Pioneer Headunit, DVD Player and SIRPNR2C Optional Pioneer SAT RADIO READY Headunit (IP-Bus CD Player or Multimedia Headunit) Optional Pioneer DVD Player Optional Pioneer CD Changer SIRPNR2C Installation Operation and Guide Installation Guide 11 11
Activating Your SIRIUS Subscription You must activate SIRPNR2C before you can start to receive the SIRIUS Satellite Radio broadcast. 1. Make sure that the SIRPNR2C is properly connected and that its antenna is oriented to receive the SIRIUS satellite signal. 2. Turn on the Pioneer headunit. 3. Press and release the POWER/ SOURCE button on the head unit to select EXTERNAL as the source. (Each press of the POWER/SOURCE button will change to a different audio source.) 4.
Specifications Operational Frequencies Satellite ......................................................................... 2322.293/2330.207 MHz Terrestrial ....................................................................................... 2326.250MHz Power Requirements .................................................................. 11-16 Volts DC Fuse Type ....................................................................................... 1-AMP (Glass) Chassis Size .............................
SIRIUS Canada Inc. 2 St. Clair Ave. Suite 1100 Toronto, Ontario M4V1L6 (888) 539-7474 www.siriuscanada.ca © 2006 SIRIUS Satellite Radio Inc. Pioneer-SIRPNR2C-English Install-Manual-(Mar.
