ST2 STARMATE REPLAY SIRIUS Satellite Radio Plug and Play User and Installation Guide
CONGRATULATIONS! Your new ST2 Starmate Replay SIRIUS® Satellite Radio Plug and Play lets you enjoy SIRIUS Satellite Radio’s digital entertainment in your vehicle, home, or boat. Use this guide to familiarize yourself with all of ST2’s features and capabilities. For the latest information about this and other SIRIUS products, please visit http://www.siriusradio.com. Table of Contents Safety Precautions ........................................................... 4 FCC Warning .................................
Table of Contents (continued) FM Preset Button ...................................................... Menu Options ................................................................ FM Transmitter .......................................................... FM Presets ............................................................. FM On/Off ............................................................... Game Alert ................................................................. Settings .........................
Safety Precautions Warning Take the following precautions to prevent fire and avoid personal injury: • Be sure the Receiver is installed as described in the Installation Guide. • The use suggestions contained in this User Guide are subject to any restrictions or limitations that may be imposed by applicable law—the purchaser should check applicable law for any restrictions or limitations before installing and/or operating this Receiver.
FCC Warning This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in this User Guide. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. • Reorient or relocate the receiving antenna. • Increase the separation between the other equipment and the Receiver.
Package Contents The following items are packaged with the ST2 Starmate Replay. Check the package to be all of the items are included. If any of the items are missing, please contact the retailer where you purchased the product. POP 12:00P A BAND P. TUNE 1 2 3 4 5 6 7 8 9 Su Starmate Replay ST2 Receiver Sirius Hits 1 rfa ce Cle Pre an para ing tio n DISP S-SEEK 001 U2 Vertigo Kit (T kn o clea ow n pr ior n / un a su rf to ap know ace plyi n of ng emul any ad he sion sive s s.
Installation Installation of your ST2 Starmate Replay Receiver is easy: 1. Choose a location in your vehicle where you will mount the Receiver. 2. Mount the Receiver to the suction cup mount and attach the suction cup portion of the mount to the vehicle window, or use the velcro strip to mount the Receiver. 3. Install the magnetic antenna on the roof of the vehicle, and route the antenna cable to the Receiver. 4. Connect the power cord for the Receiver to your vehicle’s cigarette lighter. 5.
If you are using the velcro strip for mounting, attach the velcro strip to the back of the mounting plate. Route the cables through the mounting plate underneath the tabs as shown. The cables may be routed across the mounting plate, or routed down to exit at the bottom. Place the Receiver into the mounting plate by first placing the bottom of the Receiver into the tabs at the bottom of the mounting plate (1), and then pivoting the top of the receiver into the mounting plate until it snaps into place (2).
4. Lock the cam lever down as shown. 3. Place the suction cup mount on the windshield, or other area, and press the cam lever straight down towards the suction cup to flatten the suction cup as shown.
performance from the antenna. Sedan/Coupe: Mount the antenna along the rear centerline of the vehicle roof, located at the rear of the roof near the rear window. SUV/Mini-Van: Mount the antenna along the rear centerline of the vehicle roof, located at the rear of the roof near the rear door/hatch. Pickup Truck: Mount the antenna along the rear centerline of the cab roof, located at the rear of the roof near the rear window.
PROTECTIVE MATERIAL (RED SIDE) ANTENNA (UNDERSIDE) ADHESIVE STRIP ANTENNA CABLE RUBBER ANTENNA CABLE COVER/TAIL Temporarily position the antenna and rubber antenna cable cover/tail in the selected mounting area and route the cable from the antenna to the vehicle’s interior by tucking it underneath the rubber molding around rear window, as shown. ST2 Starmate Replay User and Installation Guide Route the cable from the lowest point of the rear window into the trunk.
Double check that the location of the antenna and rubber antenna cable cover/tail are correct, and continue to press firmly down on rubber antenna cable cover/tail for another 30 seconds. RUBBER ANTENNA CABLE COVER/TAIL Connecting the Receiver Connect the antenna and cigarette lighter power adapter to the Receiver to complete the installation. The illustration below shows the location of the antenna and power connectors on the Receiver.
Activating your SIRIUS Subscription Before you can listen to the SIRIUS service, you need to subscribe to the SIRIUS Satellite Radio service. 1. Be sure that the Receiver is correctly installed and that the antenna is oriented to receive the SIRIUS signal. 2. Press the power button to turn Receiver On. After displaying the SIRIUS logo, the Receiver will update the SIRIUS channel line up. The display will show, “UPDATING CHANNELS” and show the status of the update.
again. You may do this from either the Receiver or the remote control. (This SID number is also available on the ST2 packaging.) Write the SID number down in the space provided at the end of this manual. 000 SIRIUS ID SID 012345678912 12:00P A 6. Have your credit card handy and contact SIRIUS on the Internet at: https://activate.siriusradio.com/ and follow the prompts to activate your subscription. You can also call SIRIUS toll-free at: 1-888-539-SIRIUS (1-888-539-7474) 7.
Power Harness - for connecting the power for the Receiver to the vehicle’s electrical system. FM Switching Box - for connecting the FM output of the Receiver into the FM antenna input of your vehicle’s radio. This box will automatically switch off the vehicle’s FM antenna when you turn on your SIRIUS Receiver. Audio Cables - For connecting the audio output of the Receiver into your vehicle’s audio system. Home Antenna - A SIRIUS antenna to connect to your Receiver while in your home.
ST2 Starmate Replay Receiver Basic Operation 1 2 3 4 5 6 MEMO DISP 7 S-SEEK 14 MENU 13 12 11 001 Sirius Hits 1 U2 Vertigo 8 POP 12:00P A BAND P.
Controls and Features 1. POWER Button : Turns the Receiver’s power On and Off. 2. Rewind Button: Used to rewind through a broadcast saved in Instant Replay. 3. Play/Pause Button: Pause Function: Used to pause a broadcast for Instant Replay. Play Function: Used to play a broadcast saved in Instant Replay. 4. Fast Forward Button: Used to fast forward through a broadcast saved in Instant Replay. 5. MEMO (Memory) Button (S-Seek Function): Saves and recalls artist names, song titles, and sports teams.
Remote Control 2 1 3 MUTE 4 16 5 6 7 15 14 13 12 11 MENU DISP BAND MEMO 10 1 2 3 4 5 6 7 8 9 + 8 – 9 0 Installing Batteries in the Remote Control 1. Remove the battery cover. 2. Install CR2025 battery. (+ positive side is up) 3. Replace the battery cover. 18 1. 2. 3. 4. 5. 6. Power Button : Turns the Receiver power On and Off. Category Previous/Next Buttons: Navigates through categories. MUTE Button: Mutes the audio.
After you have successfully activated your SIRIUS subscription, and the Receiver has received the subscription information from the SIRIUS signal, the default display screen will be displayed. Channel Number Auto Sizing/ Scrolling Artist Name Antenna Signal Strength Default Display Screen 001 Channel Name Artist Name Song Title Category 12:00P A Channel Name Auto Sizing/ Scrolling Song Title Band/Preset Bank Number Clock which you are currently tuned.
channel within a category and press the select button to tune to the highlighted channel. When a new channel is selected, the display will revert to the default display screen for the new channel. To exit the channel list mode without changing to a different channel, press and hold the DISP button for 1½ seconds, until the default screen is displayed.
through the available channels in each category to find the channel to which you want to listen. When you have found the channel you wish to listen to, highlight the channel using the channel up and down buttons and press the select button to tune to the channel. The new channel will begin playing and the display will revert to the default display screen for the new channel.
preset button in which you wish to store your favorite channel, until you hear a beep. The band and preset number will then be displayed in the lower right corner of the display screen to confirm that the channel has been stored. 001 001 Category 12:00P A1 Note: If the preset button already has a channel stored in it, the preset will be replaced by the newly stored channel. Using Channel Presets The active band of presets is displayed in the lower right corner of the default display screen, A, B or C.
presets are grouped and displayed by bank and preset number, i.e., A-1, A-2...B-1, B-2, etc. Empty presets are not displayed. 3. To view the channel presets in the channel list mode, where you can view 4 presets at once, momentarily press and hold the DISP button for approximately one second until the channel list mode is displayed. Repeated momentary pressing and releasing of the DISP button will sequence the display between listings of artist names, song titles, and back to channel names.
100 If you have saved a sports team (or teams) in memory, at the time Receiver is initially powered on, you will be alerted if your sports teams are playing in a game being broadcast. Also, while listening to your SIRIUS receiver, should one of your teams begin to play a game, you will be alerted.
2. For Sports Games: If the current tuned channel is an NFL, NBA, NHL, or College play-by-play sports broadcast, momentarily press and release the MEMO button. The Receiver will display a menu to choose which sports team should be saved to memory. 100 Alert Type Initial Game Alert All Score Updates “Initial Game Alert” will provide an alert when the team you have chosen is playing a game.
3. To ensure that no duplicate entries are stored in memory, the Receiver will check the stored memory list to ensure that the alert about to be stored is not already stored in memory. If a duplicate entry is found, an “Unable to Store” screen will be displayed for 1 second. Channel Name Channel Name Unable to Store Category 12:00P A The Receiver will then revert to the last active display mode. 4.
displayed. Artist Artist Sports Artist X/Y Replace Name/ Song Tit Name Team Name/ Song Tit Using the channel up and down buttons, highlight the alert that you would like to overwrite and press the select button to store the new alert. If the new alert was successfully saved in memory, a “Artist/Song/Game Stored” pop-up screen followed by an “X Used/Y Empty” screen will be displayed for 1 and 2 seconds respectively.
select button. 3. A screen displaying “Delete”, “Seek On”, and “Seek Off” will be displayed. Memory Recall Seek On Seek Off Delete 4. Use the channel up and down buttons to highlight the “Delete” option, and press the select button. A delete confirmation screen will appear. Delete Yes No To permanently delete the alert from the memory list, highlight “Yes” using the channel up and down buttons and press the select button to confirm. 5.
3. To enable S-Seek alerts, use the channel up and down buttons to highlight the “Seek On” option and press the select button. The S-Seek function is now enabled. When the S-Seek option is enabled, whenever the Receiver is turned on, it automatically searches the incoming channels to determine if a match exists with the program information stored in the S-Seek memory.
news channel, a sports channel, or any channel at all. Pressing the Jump button allows you to quickly tune to the specific channel you have programmed into the Jump button, and then tune back to the original channel by pressing the Jump button again. (Refer to the Menu Options section of this manual for instructions for configuring the Jump button.
Game Alert The Receiver has a feature called Game Alert which can automatically alert you when your favorite sports team is playing a game. When a sports game involving one of your favorite sports teams is found, a Game Alert screen is displayed, followed by a screen displaying tuning information for the sports games.
Pressing and holding the Play/Pause button changes the display to a listing of the artist’s names in the stored audio, from the most recent to the oldest, beginning with an entry called “Live”. (Pressing the DISP button will toggle the display between the artist name list and the song/program title list.
program in the stored audio, and playback automatically begins. Repeatedly pressing and releasing the Rewind Button causes the Receiver to continue to move backwards in the stored audio to the start of each previous song or program until the beginning of the stored audio is reached. If the beginning of the stored audio is reached, a beep will be heard (if the Confirmation Tone option is enabled) and playback will automatically begin.
describing the Rewind and Fast-Forward buttons for specific instructions for their use. Note: If the Receiver is tuned to another channel while in the Instant Replay mode, the Instant Replay mode is exited, all the audio stored in the Instant Replay memory is erased, and the tuned channel begins to play. Also note that tuning to another channel may automatically occur if another feature of the Receiver has been programmed to do so.
been used, the bar will be completely filled. Progress Bar Showing Amount of Memory Filled End of Stored Audio Beginning of Live Broadcast 001 Ch. Name -00:20:03 Artist Name Song Title A diamond-shaped Play Position indicator is superimposed over the Progress Bar which provides a visual indicator of the current playback position in the Instant Replay memory. Play Position Indicator 001 Ch.
stored at the same rate at which you are playing back the stored audio. You can use the FastForward button to skip ahead or exit the Instant Replay mode, and begin listening to the live broadcast again. Should you press the Play/Pause button to stop the playback, the play position indicator will stop moving and continue to provide a visual indication of your current position in the Instant Replay memory.
FM Preset Button The Receiver has a special button called the FM Preset button, which is identified by the icon. When the FM Preset button is pressed, the Receiver turns on the built-in FM transmitter and begins transmitting on the next frequency from the FM frequency preset list. A screen will be displayed for 3 seconds showing the currently selected FM frequency. When the FM transmitter is turned on, an FM radio tuned to the same FM frequency will receive the currently tuned SIRIUS broadcast.
Menu Options FM Transmitter Game Alert Settings Time Based Features To select a menu option, use the channel up and down buttons to highlight the option you wish to adjust, and press the select button. If a selection is not made within 10 seconds, the Receiver will exit the menu options screen, and revert to the last active display mode. To exit the Menu Options screen, or any of the other menu option screens, repeatedly press and release the MENU key until you are returned to the default display screen.
88.1 MHz 88.3 MHz 88.5 MHz 88.7 MHz 3. Use your FM radio to locate quiet FM frequencies where there is no interference from adjacent FM stations. These are the frequencies which should be added to the FM Presets list. 4. Using the channel up and down buttons, highlight the frequency you wish to select for the preset and press the select button. The FM frequency will then be stored in the preset. If you do not want a frequency for the preset, choose EMPTY from the menu and press the select button.
by using the Memory (MEMO) function. (See the section titled, Memory (MEMO) and Song Seek (SSeek) Functions for more information about adding additional teams.) To choose sports teams to add for game alerts, do the following: 1. Use the channel up and down buttons to highlight “Game Alert” and press the select button. 2. Use the channel up and down buttons to highlight the sports league or college category of the sports team you wish to add, and press the select button. Game Alert NFL NBA NHL COLLEGE 3.
Settings Jump Setting Display Options Memory Options Auto Select To select a menu option, use the channel up and down buttons to highlight the option you wish to adjust, and press the select button. Jump Settings The Jump setting controls the actions of the Jump button. The Jump setting menu may also be accessed by pressing and holding the Jump button.
To exit the Jump Settings menu, press the MENU button. JumpSet To set the Jump button to a specific channel (other than a traffic channel) when pressed, do the following: 1. Use the channel up and down buttons to highlight the “JumpSet” option, and press the select button. 2. The following screen will be displayed: Jump Setting Tune to desired Ch. press & hold the button Use the channel up and down buttons to tune to the channel you want assigned to the Jump button.
Brightness adjusts the overall intensity of the LCD display to help with viewing in different lighting conditions. Contrast adjusts the relationship between the background and the text on the LCD display. Use the channel up and down buttons, to adjust the brightness/contrast. The bar graph will move to indicate the change. Brightness - Contrast + - + Automatic Memory Search To turn the automatic memory search On or Off, do the following: 1.
and down buttons to highlight “Yes”, and press the select button. Clear All Memory? To change Auto Select setting to On or Off, use the channel up or down buttons to highlight “On” or “Off”, and press the select button. Auto Select Yes No The S-Seek memory is now erased. To exit the Memory Options menu, press the MENU button.
Confirmation Tone The Receiver will sound an audio tone alert when it is powered On or Off, as well as when an S-Seek alert is activated and other alerts. The default setting is On. To change the Confirmation Tone setting to On or Off, use the channel up or down buttons to highlight “On” or “Off”, and press the select button.
enter a four digit numerical code. This code can be any four digit number from 0000 to 9999. will have the word “Lock” displayed to the right of the channel name. Enter Code # ____ If you should exit this prompt without entering a code, you will be prompted to set a code next time you enter the Lock/Unlock option. 3. If a code has been previously set, a “Enter Code” prompt will be displayed. Enter your four digit code and press the select button to continue. Enter Code # ____ 4.
Enter Code Enter Code Wrong Code # ____ If you should exit this prompt without entering a code, you will be prompted to set a code the next time you enter the Edit Code option. To change the Parental Control code, do the following: 1. Use the channel up and down buttons to highlight “Edit Code”, and press the select button. 2. At the prompt, enter the four digit Parental Control code. 4. If the correct code was entered, the “New Code” prompt will appear. Enter the new Parental Control code.
Confirm Code Confirm Code Code Saved Wrong Code To exit the Parental Control menu, press the MENU button. If you have forgotten your Parental Control code, call SIRIUS Customer Service for help. Time Based Features These settings allow for adjustment of the following features of the Receiver: Clock - Sets the clock format, time zone, and daylight savings time function. Alarm - Sets an alarm for a specific time. Program Alert - Sets the Receiver to tune to a specific channel at a specified time.
Format To change the clock display format of the Receiver to 12 hour or 24 hour format, do the following: 1. Use the channel up and down buttons to highlight “Clock” and press the select button. 2. Use the channel up and down buttons to highlight either “12 hour” or “24 Hour”, and press the select button. Format 12 Hour 24 Hour To exit the Clock menu, press the MENU button. Time Zone To change the time zone of the Receiver, do the following: 1.
Alarm This feature allows you to set an alarm to sound at a specific time each day, and to turn the alarm feature On or Off. Alarm Set Alarm Alarm Time Set Alarm To turn the alarm On or Off, do the following: 1. Use the channel up and down buttons to highlight “Set Alarm”, and press the select button. 2. Use the channel up and down buttons to highlight “Alarm On” or “Alarm Off”, and press the select button. Set Alarm On Off To exit the Set Alarm menu, press the MENU button.
on in order for this feature to function. Program Alert Program Time/Day Channel Number Program Alert On/Off Program Time/Day To program the time and day when the receiver will tune to the specified channel, do the following: 1. Use the channel up and down buttons to highlight “Program Time/Day”, and press the select button. 2. At the “Program Time/Day” screen, use the channel up and down buttons to highlight “Time”, and press the select button. you wish to tune to the specified channel.
Channel Number To set the channel to which the receiver will tune when the Program Alert feature is On, do the following: 1. Use the channel up and down buttons to highlight “Channel Number”, and press the select button. 2. When the default display screen is displayed, use the channel up and down buttons to navigate to the channel which you wish to select for the Program Alert feature. Use the category previous and next buttons to navigate between categories.
button. If the Auto Shutdown is not reset, the Receiver will automatically power off. 001 Channel Name Artist Name Cancel Auto Shutdown Song Title Category 12:00P A To enable or disable the Auto Shutdown feature, do the following: 1. Use the channel up and down buttons to highlight “Auto Shutdown”, and press the select button. 2. Use the channel up and down buttons to highlight “Enabled” or “Disabled”, and press the select button.
transmitters. To display the Signal Indicator screen, do the following: 1. Use channel up and down buttons to highlight “Signal Indicator”, and press the select button. Signal Indicator SAT - + TER - + 2. Two 10 segment horizontal bar graphs will be displayed with a “-“ sign to the left and a “+” sign to the right. SAT indicates the satellite signal strength while TER indicates the terrestrial signal strength, if a terrestrial signal is available.
the features of the Receiver to the factory defaults, do the following: 1. Use the channel up and down buttons to highlight “Factory Default”, and press the select button. 2. Use the channel up and down buttons to select “Yes” to restore all settings to the settings from the factory, or select “No” to leave them as-is and return to the Menu Options menu. Restore Settings? original factory settings. Are You Sure? Restoring Yes Factory Defaults No 5.
Troubleshooting This section lists several common problems and suggested solutions. If, after trying the suggested solutions listed here, you are still unable to resolve the problem you’re having with your Receiver, contact your installer, dealer, or retailer for more help. Problem Cause and Suggested Solution Receiver does not power on Blown fuse, or the power cable is not properly connected. Check for a bad fuse and check power cable connection.
Specifications Satellite Frequencies ............................................................................................. 2322.293/2330.207 MHz Terrestrial Frequencies ......................................................................................................... 2326.250MHz Power Requirements ............................................................................... 9-16 Volts, Negative Ground, DC Audio Output .........................................................................
12 MONTH LIMITED WARRANTY SIRIUS Satellite Radio Inc. (the “Company”) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company’s option) without charge for parts and repair labor.
Please record the SIRIUS ID (SID) in the space provided below: SIRIUS ID: SIRIUS Customer Service: 1-888-539-7474 SIRIUS Product Support: 1-800-869-5590 customercare@sirius-radio.
SIRIUS Satellite Radio Inc. 1221 Avenue of the Americas New York, NY 10020 1-888-539-7474 www.sirius.
