User's Manual

3 Connecting to a Windows NT Server 3.51
Windows NT Workstation Version 3.51
Windows NT
Workstation
Version 3.51
Requirements
• HP Vectra with Microsoft Windows NT Workstation 3.51 installed.
• IBM AUTO LANStreamer PCI Drivers diskettes Ver. 3.04
• Driver Name for Vectra VL8 and VL7: OEMSETUP.inf Size: 67KB Date:
10/18/96
• Driver Name for Vectra VE7/VE8: Streamer.sys Size: 85KB Date: 09/
13/96.
• Microsoft Windows NT Workstation 3.51 and Service Pack Media.
• Microsoft Windows NT Server 3.51machine that supports Net BEUI, TCP/
IP, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.
Device Configuration
Procedure
1 With the HP Vectra turned off install the IBM LANStreamer 16/4 PCI TR
adapter card into a PCI slot.
2 Insert the IBM LANStreamer TR drivers disk 2 of 5 (AUTO LANStreamer
PCI Diagnostic Disk) and power on the machine.
3 After the machine boots, verify that the adapter finished testing and that
the adapter is “OK.”
4 Click on “F3” to exit, and then press “CTRL+ALT+DEL.”
5 After windows loads, open the “MAIN” program group , and double-click
on “Control Panel” Icon.
6 Select the “Network” icon in the “Control Panel” program group.
7 Click on “YES” in the “Network Settings“ dialog box, and NT Networking
will be installed on your computer.
8 Insert the Windows NT Workstation CD.
Vectra VL8 Vectra VL7 Vectra VE7/VE8
I/O Base Address F800h C800h DC00h
Interrupt Request
Level
11 11 10(11)