Table of Contents Introduction . . . . . . . . . . . . . . . . . . . 5 FM Presets . . . . . . . . . . . . . . . . . . . . . . . . 66 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Safety and Care Information . . . . . . . . . . 7 What’s in the Box? . . . . . . . . . . . . . . . . . . . 9 Stratus 6 Functions . . . . . . . . . . . . . . . . . 10 PowerConnect Vehicle Dock . .
Introduction 5
Introduction Features Congratulations, on your purchase of the Stratus 6! The Stratus 6 has these exciting features to enhance your overall experience: • Easy to read blue display: View artist name, song title, and channel information on an easy to read display. • A La Carte programming capability: Make individual channel selection. • Channel guide: View your individual channel lineup by category.
Safety and Care Information IMPORTANT! Always read and understand all the instructions to avoid injury to yourself and/or damage to your device. SIRIUS XM Radio Inc. disclaims all responsibility for damage from data loss due to breakdown, repair, or other causes. • Do not expose to extreme temperatures (above 140ûF or below -4ûF, or above 60ûC or below -20ûC). • Do not expose to moisture. Do not use device near or in water. Do not touch the device with wet hands.
Introduction WARNING! • Opening the case may result in electric shock. • If the liquid crystal fluid comes in contact with your skin, wipe the skin area with a cloth and then wash the skin thoroughly with soap and running water. If the liquid crystal fluid comes into contact with your eyes, flush the eyes with clean water for at least 15 minutes and seek medical care. If the liquid crystal fluid is ingested, flush your mouth thoroughly with water. Drink large quantities of water, and induce vomiting.
What’s in the Box? sel menu jump Stratus 6 Radio PowerConnect Vehicle Dock Aux In Cable Dash Mount PowerConnect Power Adapter Magnetic Mount Antenna and Rubber Tail Screws Vent Mount and Extended Vent Clamps Antenna & Dash Mount Alcohol Preparation Pads 9
Introduction Stratus 6 Functions Power Button Turn radio on and off. FM / Menu Button FM: Press to access and cycle through FM presets. Menu: Press and hold to access advanced features and configuration options; also when in configuration options, press and hold to return to main display screen. sel menu jump Jump Directly access traffic and weather of the 20 most congested cities. 10 Left and Right Arrows Search for channels by category.
PowerConnect Vehicle Dock Color-Coded Connections The color-coded PowerConnect Vehicle Dock makes it simple to connect. Just match the colors on the cable ends to the colors on the dock to see what goes where. Front View PWR FM PWR (Red) Connection for PowerConnect Power Adapter. AUDIO FM (Blue) Connection for optional FM Direct Adapter (sold separately). AUDIO (Green) Connection for Aux In Cable or Cassette Adapter (sold separately). ANT ANT (Silver) Connection for the Magnetic Mount Antenna.
Vehicle Installation 13
Vehicle Installation Step 1: Choose a Location for Your Radio When installing the Stratus 6 in your vehicle, choose a location where it will not block your vision, interfere with the controls, or obstruct any air bags. The location should be easily accessible and provide good visibility of the display, and should not be located where it will be in direct sunlight, which will affect the visibility of the display screen.
Option 3 A. sel jump Option 4 Option 5 B. sel sel jump jump B.
Vehicle Installation Step 2: Install the Vent or Dash Mount Depending on your situation, you can either choose to use the Dash Mount or the Vent Mount. Installing the Dash Mount: CAUTION! The adhesive used on the Dash Mount may be difficult to remove. Do not install this mount on leather surfaces (contact your vehicle dealer if you are unsure about your dash surface), and make sure the air temperature is at least 60ûF (15ûC) during installation.
4 Clean the surface with the alcohol preparation pad and let it dry thoroughly. 5 Peel off the adhesive liner. Position, press, and hold the Dash Mount and PowerConnect Vehicle Dock in place for 30 seconds. IMPORTANT! Allow the Dash Mount adhesive to cure (dry) for a minimum of 2-4 hours before using the mount. The best adhesion occurs after 24 hours. 6 Knob The dock mounting plate can be tilted in different directions. Adjust as necessary for your particular vehicle.
Vehicle Installation Installing the Vent Mount: 1 Locate a vent with horizontal louvers sturdy enough to hold your PowerConnect Vehicle Dock and radio. 2 If the vent louvers in your vehicle are recessed, you may need to use the longer vent clamps with the Vent Mount. If so, Remove the shorter vent clamps and install the longer ones into the Vent Mount. Be sure to observe the orientation of the vent clamps as shown.
3 Attach the Vent Mount to the PowerConnect Vehicle Dock using the provided screws. 4 Push the Vent Mount onto the vehicle vent as shown (1) until it hooks on the rear of the vent louver (2). 5 Rest the foot against the bottom of the vent (2), and adjust the tilt of the Vent Mount by repositioning the foot to a different adjustment hole (3). 1 2 3 Dash Dash Dash HOOKED PUSH Vent Vent Louver FOOT Vent TILT ADJUSTMENT HOLES To remove the Vent Mount, push the mount into the vent.
Vehicle Installation Step 3: Mount the Magnetic Mount Antenna The Magnetic Mount Antenna contains a strong magnet which will stick to any metal part of your vehicle, but will not damage the vehicle. To install the Magnetic Mount Antenna: 1 Choose the best location for your antenna considering your own personal situation. Pay particular attention to any accessories that you may have like luggage racks and how frequently you may use them.
SUV: We recommend mounting the antenna at the rear of the roof as shown. Convertible: We recommend mounting the antenna at the leading edge of the trunk as shown. Pickup Truck: We recommend mounting the antenna above the front windshield as shown.
Vehicle Installation 2 3 22 Attach the Rubber Tail to the antenna and press the antenna cable into the Rubber Tail. The Rubber Tail will help to position the antenna the correct distance from the edge of the roof or trunk lid. Protective Material Clean the surface of the selected mounting location using the alcohol preparation pad and let it dry thoroughly.
TIP! Mount the antenna on the roof (for most vehicles) or trunk (for convertibles) where it has a clear view of the sky in all directions.
3” TIP! Mount the antenna on the roof where it has at least 3 inches of clear space around it. TIP! Use the supplied Rubber Tail to cover and protect the antenna cable. CAUTION! Don’t mount the antenna closer than 3 inches from the edge of the roof. Use the supplied Rubber Tail as a guide for judging proper length and correct positioning.
CAUTION! Don’t mount the antenna inside the vehicle, for example, on the dashboard. CAUTION! Don’t mount the antenna on any of the vehicle’s front, back or side pillars. CAUTION! Don’t mount the antenna close to a roof rack. Adjust the rack so it’s further away from the antenna or move the antenna closer to the center of the roof.
Vehicle Installation CAUTION! Don’t mount the Magnetic Mount Antenna close to another antenna. Mount it at least 3 inches away. TIP! Always be careful to include enough slack in your cable to accommodate open doors or trunk lids. Use things typically found around the home, like electrical tape, to secure cables in areas so that hinges do not pinch the cable with the door. Hide any excess cable in the trim.
Step 4: Route the Magnetic Mount Antenna Cable Before you begin routing the antenna cable, read these general instructions for how to route and hide the antenna cable. Then route your antenna cable according to the instructions which follow for your specific type of vehicle.
Vehicle Installation Route cable out from under rear windshield moulding and tuck into weatherstripping around trunk opening Avoid sharp bends by running cable through weatherstripping for several inches Pull weatherstripping from trunk opening Tuck cable into weatherstripping.
Bring cable out of weatherstripping and into trunk Route cable along trunk wall and into cabin through gap or conduit, along existing wiring harness Route cable along trunk wall and into cabin 29
Vehicle Installation Use a blunt plastic putty knife or similar blunt tool trim and tuck cable under trim.
Continue routing cable under carpet or console to radio location Pull carpet or mat back Coil excess cable under carpet or mat Bring cable out from trim Bring cable out from trim and route under carpet to dashboard or console TIP! Always be careful to include enough slack in your cable to accommodate open doors or trunk lids. Use things typically found around the home, like electrical tape, to secure cables in areas so that hinges do not pinch the cable with the door. Hide any excess cable in the trim.
Vehicle Installation • Sedan/Coupe With Antenna Placed at the Rear of the Roof: 1. Feed the antenna cable from the antenna underneath the rubber molding around the rear window. Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the rear window and tuck the antenna cable underneath the molding. Route the antenna cable around and down the window to the lowest point. If your rear window does not have rubber molding, we recommend consulting a professional installer. 2.
area under the interior trim, towards the front of the vehicle. Use a blunt plastic putty knife or similar blunt tool to lift the plastic trim just enough to tuck the cable under underneath. Avoid side airbag locations on back pillars and above the doors. Airbag locations are marked with “SRS” logos. Be careful not to crimp or cut the cable. 5. Bring the cable out from the trim near the front of the cabin and route it under the carpet toward the dashboard or console.
Vehicle Installation • Sedan/Coupe With Antenna Placed at the Front of the Roof: 1. Feed the antenna cable from the antenna underneath the rubber molding around the windshield. Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the windshield and tuck the antenna cable underneath the molding. Route the antenna cable around and down the windshield to the lowest point. 2.
• SUV: 1. Feed the antenna cable underneath the rubber weather stripping of the rear tailgate window/door and route the cable along the rear hatch. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping. Pull the cable out from weather stripping and route it into the cabin under the interior trim. Avoid hinges or gears that could crimp or cut the cable. 2.
Vehicle Installation or controls. Secure the excess cable with wire ties (purchased separately). 4. Bring the end of the cable out at the PowerConnect Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector of the dock. 5. Continue with “Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter” on page 39. • Convertible: 1. Bring the antenna cable from the antenna into the trunk at the front edge of the trunk lid.
Airbag locations are marked with “SRS” logos. Be careful not to crimp or cut the cable. 4. Bring the cable out from the trim near the front of the cabin and route it under the carpet toward the dashboard or console. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties (purchased separately). 5. Bring the end of the cable out at the PowerConnect Vehicle Dock location.
Vehicle Installation • Pickup Truck: 1. Use a blunt plastic putty knife or similar blunt tool to lift the rubber molding around the windshield and tuck the antenna cable underneath it. 2. Continue tucking the cable underneath the windshield molding around the windshield to the lowest corner. 3. At the lowest corner of the windshield, route the cable out of the windshield molding and into the rubber weather stripping around the door opening.
Step 5: Connect the Magnetic Mount Antenna and PowerConnect Power Adapter 1 Plug the Magnetic Mount Antenna into the silver ANT connector on the PowerConnect Vehicle Dock. 2 Insert the PowerConnect Power Adapter into your vehicle’s cigarette lighter or power adapter socket. 3 Plug the PowerConnect Power Adapter into the red PWR connector on the dock.
Vehicle Installation Step 6: Connect the Audio To play audio through your vehicle’s stereo or FM radio, decide on one of the following audio connection options: • Option 1: Best: Use the included Aux In Cable if your vehicle’s stereo system has an auxiliary input connection. Refer to your vehicle’s owners manual to find the location of the auxiliary input jack, or consult the vehicle dealer.
Option 1: Aux In Cable Installation Instructions 1 Plug one end of the Aux In Cable into the green AUDIO connector on the dock. AUDIO ANT 2 Plug the other end into the auxiliary input jack connection of your vehicle’s stereo system. 3 Insert your Stratus 6 into the dock, aligning the radio against the rear of the dock so that the rails on the dock fit into the mounting slots in the back of the radio.
Vehicle Installation 42 4 Power on your Stratus 6 by pressing the Power button. 5 Be sure the vehicle is outside and the antenna has a clear view of the sky. Verify that you are receiving the SIRIUS signal. There should at least be one bar on the upper right corner of the main display screen jump that denotes antenna signal strength. You can also to scroll to and highlight Signal. press and hold menu and then press Press the Select button.
If the signal reception is good, but there is no audio when tuned to channel 184, be sure the vehicle’s stereo system is set to the correct source, i.e., auxiliary input source (step 7). Also be sure that the audio level is set high enough to be heard (step 9). Refer to “Troubleshooting” on page 88 for additional help.
Vehicle Installation Option 2: Cassette Adapter Installation Instructions 1 Plug the Cassette Adapter into the green AUDIO connector on the dock. 2 Insert the Cassette Adapter in the vehicle’s cassette deck. You may need to turn on your vehicle’s stereo system in order to do so. 3 Insert your Stratus 6 into the dock, aligning the radio against the rear of the dock so that the rails on the dock fit into the mounting slots in the back of the radio.
4 Power on your Stratus 6 by pressing the Power button. 5 Be sure the vehicle is outside and the antenna has a clear view of the sky. Verify that you are receiving the SIRIUS signal. There should at least be one bar on the upper right corner of jump the main display screen that denotes antenna signal strength. You can also press and hold menu and then press to scroll to and highlight Signal. Press the Select button.
Vehicle Installation in your vehicle. Refer to “Audio Level” on page 84. If the signal reception is good, but there is no audio when tuned to channel 184, be sure the vehicle’s stereo system is set to the correct source, i.e., cassette source (step 7). Also be sure that the audio level is set high enough to be heard (step 9). Refer to “Troubleshooting” on page 88 for additional help.
Option 3: PowerConnect Installation Instructions 1 Insert your Stratus 6 into the dock, aligning the radio against the rear of the dock so that the rails on the dock fit into the mounting slots in the back of the radio. sel menu jump 2 Power on Stratus 6 radio by pressing the Power button. 3 Be sure the vehicle is outside and the antenna has a clear view of the sky. Verify that you are receiving the SIRIUS signal.
Vehicle Installation 4 You’ll first need to find an available FM channel. An available FM channel is one that’s not being used by an FM radio station in your area. When you tune your FM radio to an available channel, you should only hear static or silence – not talk or music. We recommend one of the following methods to find an available FM channel: a. Use the SIRIUS | XM FM Channel Finder at www.sirius.com/ fmchannel. Go to the website and enter your zip code.
6 Pick the first FM channel on your list from step 4. Turn on your vehicle’s FM radio (if you have not already done so) and tune it to this FM channel. menu 90.1 sel jump MATCH FM CHANNELS 7 Set your Stratus 6 to transmit on the same FM channel that you have selected in step 4: i. Press and hold menu until the menu options are displayed. to scroll to and highlight FM Settings and press the ii. Press Select button. iii. FM Channels will be highlighted. Press the Select button.
Vehicle Installation vi. The FM channel you selected FM Channels will be confirmed on the display screen. The Stratus 6 will tune to >FM2 96.3 the FM channel. FM3 Empty 8 You should hear SIRIUS channel 184 through your vehicle’s FM radio. If you are satisfied with the sound quality, you’re done! You are now ready to activate your Stratus 6. 9 If the selected FM channel doesn’t work well for you, work down the list of FM channels until you find one that allows you to hear SIRIUS clearly.
Option 4: FM Direct Adapter (FMDA) Installation The FMDA needs to be installed by a professional installer. Professional installation can help improve your radio’s reception and significantly reduce the visibility of wires. To learn more, check with the retailer where you bought your radio, or go to sirius.com/accessories.
Activation 53
Activation Before you can enjoy Commercial-Free Music, plus Sports, News, Talk & Entertainment, you need to activate your Stratus 6: 1 Make sure your Stratus 6 is properly installed, turned on, and receiving the SIRIUS signal so that you can hear the audio on channel 184. 2 When you first turn on the Stratus 6, after the startup sequence, the SIRIUS channel lineup may update. Wait until any channel updates have completed before pressing any buttons.
button. Thereafter, if you press or , you can scroll and tune other channels. Activation usually takes less than 5 minutes, but sometimes may take longer. We recommend that your radio remain on until activated.
Using Your Stratus 6 57
Using Your Stratus 6 The Main Display Whenever you power your Stratus 6 On, it will automatically tune to the last channel you were listening to before it was powered Off. The Stratus 6’s display screen will show the channel number, the song or show being played, and the artist name of the current channel. This screen is referred to as the main display screen in this guide.
My Channels Channels are organized into categories to make it easier for you to find the ones that suit your taste. My Channels is a special category that displays the channels contained in your subscription plan. You can display this and any until the category is displayed.
Using Your Stratus 6 Navigation Basics Power Button Pressing the Power button turns the Stratus 6 On or Off. Navigation Buttons Use the Left, Right, Up, and Down buttons to navigate through various features and functions of Stratus 6. • Left or Right button: Displays the channel categories such as Rock, Pop, Sports, Talk/New etc. Repeated presses cycle through the categories one at a time. Decreases or increases the settings of various menu options such as Brightness, Audio Level, etc.
display screen, pressing the Select button prompts for the entry of a channel number using the number buttons. Once the channel number is entered, the radio directly tunes to the new channel. At the main display screen, pressing and holding the Select button tunes to the previous channel that was being played. FM/Menu Button FM provides easy tuning of FM presets for optimized PowerConnect performance. Repeatedly pressing FM displays and cycles through the list of preset FM channels one at a time.
Using Your Stratus 6 Listening to Satellite Radio Tune a channel: 1 Press and release previous channel. 2 Press and hold and to speed scroll through the channels. Release to tune to channel which is displayed. and to immediately tune to the next or View a category: Channels are organized into categories to make it easier for you to find the ones that suit your taste. 1 To view a category press 2 Scroll through the channels in the and , and find the category using channel you want.
Direct Tune A channel can be tuned directly by entering the channel number using the number buttons. 1 To directly tune a channel press the Select button. 035 Chill Enter Channel # ___ 2 Enter the channel number using the buttons 0-9. Wait a moment until the channel is tuned, or press the Select button to immediately tune to the channel.
Using Your Stratus 6 Jump When configured properly, pressing jump will tune to the traffic and weather channel of a selected city, from a list of the 20 most congested cities. This button allows you to quickly tune the traffic/weather broadcast of the selected city, and then tune back to the original channel to which you were listening by pressing jump again.
Returning to main display screen When changing the radio options using the menu options, pressing and holding menu in most instances will return you to the main display screen. In some instances, you may need to follow the instructions on the display screen. Favorite Channels You can set up to 10 of your favorite channels so you can easily access them. Each favorite channel can be assigned to a number button (0-9). To assign a favorite channel to a number button: 1 Tune to the desired channel.
Using Your Stratus 6 FM Presets FM presets make it easy to quickly access stored FM channels and choose a new FM channel from them. Use FM presets when you use PowerConnect to listen to your Stratus 6 through your vehicle’s FM radio. To start using a different FM preset: 1 Press FM to display the current FM channel preset. 017 Jam_ON 97.9 FM 2 The currently selected FM preset is shown. To display and select the next FM preset press FM. 3 Repeatedly pressing FM will cycle through the FM presets.
Special Features 67
Special Features Parental Lock Your Stratus 6 has the ability to lock channels you do not want others (such as children) to access without your permission. Locked channels will not appear in the channel or category list. The default lock code is 0000. Locked channels can be tuned directly using the 0-9 number buttons and entering the locked channel number. You will be prompted to enter your lock code. If the lock code is correctly entered, the channel will begin playing.
5 Enter a new 4 digit code using the 0–9 number buttons. 6 Once you have entered the code Confirm you will then be prompted to # ____ enter the new code again to confirm. If you entered the same lock code again, the code is saved. Confirm 7 Press and hold menu to exit. Code Code Code Saved To lock or unlock a channel: 1 Press and hold menu until the menu options are displayed. 2 Press to scroll to and highlight Parental Lock and press the Select button. 3 Lock/Unlock is highlighted.
6 7 70 Press the Select button to lock or unlock a channel. Note that locked channels will display a lock icon to the right of the channel name. Lock/Unlock >104 Raw Dog 105 LaughUSA You can continue to select channels for locking or unlocking. When you are finished, press and hold menu to exit.
Where Else Can You Use Your Stratus 6? 71
Where Else Can You Use Your Stratus 6? SIRIUS | XM offers a variety of accessories that allow you to adapt your Stratus 6 Radio to your lifestyle and enhance your listening experience. With these accessories, you can effortlessly take your Satellite Radio listening experience from your vehicle to your home or office or on the go — all with a single subscription. • In the Home, Office, etc. – With a Home Kit, you can play your Stratus 6 over an existing home, office, or other stereo system.
Configuring Your Stratus 6 73
Configuring Your Stratus 6 Sirius ID Your Stratus 6 has a numeric 12-digit ID which uniquely identifies the radio. This ID is used during the activation process. To display the Sirius ID: 1 Press and hold menu until the menu options are displayed. 2 Sirius ID will be highlighted. Press the Select button. The Radio ID will be displayed. 3 74 Press and hold menu to exit.
Find Available FM Channels in Your Area Before attempting any of the procedures below, you should park your vehicle in a safe location. Do not attempt to set up your FM channels or any Stratus 6 function while driving. PowerConnect allows you to listen to SIRIUS audio through your vehicle’s FM radio. You will first need to find an available FM channel, which is a channel that is not being used by an FM radio station in your area.
Configuring Your Stratus 6 and Select an FM Channel” on page 79.) You should hear the SIRIUS channel through your vehicle’s radio. If you are satisfied with the sound quality, you’re done! If this FM channel doesn’t work well for you, work down the list until you find an FM channel that allows you to hear SIRIUS clearly. OR 76 2 Manually tune through your local FM channels Manually tune through your local FM channels on your vehicle’s FM radio. Turn on your vehicle’s FM radio. Start at 88.
NOTE! You may find an FM channel with static or silence that does not work with the Stratus 6. It is possible that some type of inaudible interference is present that prevents reception of the Stratus 6 broadcast. Your only options are to use another FM channel or a different audio connection method. TIP! If you regularly drive from one location to another, such as your daily commute, you may need to use different FM channels along your route for best performance.
Configuring Your Stratus 6 Turn FM Transmitter On/Off The built-in FM Transmitter in the Stratus 6 works with the PowerConnect Vehicle Dock, and is used when you choose to listen to the Stratus 6 through your vehicle’s FM radio. To turn the FM Transmitter On or Off: 1 Press and hold menu until the menu options are displayed. 2 Press to scroll to and highlight FM Settings and press the Select button. 3 Press to scroll to and highlight FM Transmitter and press the Select button.
Set and Select an FM Channel The Stratus 6 allows you to easily store (i.e., preset) up to 5 different FM channels. At any time, you can select any one of these 5 FM presets to transmit audio from the Stratus 6 to your vehicle’s FM radio. Having a choice of 5 FM presets also makes it easy to switch to the appropriate FM channel as you travel from one area to another. Each FM preset is stored in its own storage location. You can easily add or edit the FM preset in any one of the 5 storage locations.
Configuring Your Stratus 6 pressing and to tune in steps of .2, i.e., 99.3 to 99.5, and pressing and to tune in steps of 1, i.e., 99.3 to 100.3. Press the Select button to select the FM channel. The FM channel you selected will be confirmed on the display screen and the Stratus 6 will tune to the FM channel. 6 Set your vehicle’s FM radio to same FM channel. IMPORTANT! You first need to find available FM channels in your area. Refer to ”Find Available FM Channels in Your Area” on page 75.
Jump Settings Jump can be set to jump to the traffic and weather channel of one of the 20 most congested cities. You’ll need to select the desired city from the list. To configure jump: 1 Press and hold menu until the menu options are displayed. 2 Press to scroll to and highlight Jump Settings and press the Select button. 3 A list of cities will be displayed. or to scroll to and Press highlight your desired location and press the Select button. 4 Choose Traffic >SF STL Press and hold menu to exit.
Configuring Your Stratus 6 Display The Display option allows you adjust the brightness and contrast of the Stratus 6’s display to improve its visibility in different lighting conditions. You also can set the mode of the display screen to show channel name or category name information. To change the display’s brightness or contrast: 82 1 Press and hold menu until the menu options are displayed.
To change the display screen mode: 1 Press and hold menu until the menu options are displayed. 2 Press to scroll to and highlight Display and press the Select button. 3 Press to scroll to and highlight Mode and press the Select button. 4 Mode >Channel Name Category Name Press or to scroll to and highlight Channel Name or Category Name and press the Select button.
Configuring Your Stratus 6 Audio Level The audio level of the Stratus 6 can be adjusted when an audio connection is made between the dock and the vehicle’s stereo system. Audio level is used to adjust the Stratus 6’s volume level to match the volume of other audio sources you may use, such as a CD player, other FM stations, or an MP3 player. Do not use the audio level as a volume control. Use the volume control on your vehicle stereo instead.
Signal For best reception, your Magnetic Mount Antenna should have an unobstructed view of the SIRIUS satellites. In large cities, terrestrial transmitters (ground repeaters) help increase the signal coverage. Your Stratus 6 can display the received strength of the satellite and terrestrial signals being received. To display the signal strength: Press and hold menu until the menu options are displayed. 1 Press and hold menu until the menu options are displayed.
Factory Default You can clear all of your personal settings, such as favorite channels, and return the radio to its original out-of-the-box settings. To restore the Stratus 6 to the factory defaults: NOTE! Restoring defaults permanently removes all personal settings. 86 1 Press and hold menu until the menu options are displayed. 2 Press to scroll to and highlight Factory Default and press the Select button. 3 Press to scroll to and highlight Yes and press the Select button.
Troubleshooting 87
Troubleshooting Stratus 6 has been designed and built to be trouble-free but if you experience a problem, try this: • Check that all connections are firm and secure. • Make sure the vehicle power socket is clean and free of corrosion. • Make sure you have connected the Stratus 6 as described in this User Guide. Verify that the PowerConnect Power Adapter is plugged into the vehicle’s cigarette lighter or power adapter socket, and that the LED on the PowerConnect Power Adapter is lit (on).
If you see this on the screen: Try this: Invalid Channel • You have attempted to tune to a channel that you have not subscribed to, or does not exist. Select a channel to which you have subscribed. Firmware Updating • Your Stratus 6 is being updated over the air with the latest software. Wait until the update is done. If this happens: Try this: You do not receive all the SIRIUS channels to which you have subscribed • Ensure that you have followed the proper activation process.
Troubleshooting 90 If this happens: Try this: Audio fades or has static when listening • Check all cables for a firm and secure connection. • If you are using PowerConnect to listen via your vehicle’s FM radio, and the problem persists, it most likely is interference from another commercial or broadcast FM station. You will need to find an unused or available FM channel in your area. Refer to “Find Available FM Channels in Your Area” on page 75.
Product Specifications 91
Product Specifications System Power Requirements: Operating Temperature: Audio Output: 9-16 V DC, 500 mA (max) -20°C to +60°C (-4°F to +140°F) 1.0 Vrms (max) Stratus 6 Radio Dimensions: Weight: 115 mm (width) x 48 mm (height) x 17 mm (depth) 4.5 in (width) x 1.9 in (height) x 0.7 in (depth) 66 g (2.3 oz) PowerConnect Vehicle Dock Dimensions: Weight: FM Connector: Audio Connector: Antenna Connector: Power Connector: 102 mm (width) x 52 mm (height) x 28 mm (depth) 4.0 in (width) x 2.
Patent and Environmental Information Patent Information It is prohibited to, and you agree that you will not, copy, decompile, disassemble, reverse engineer, hack, manipulate, or otherwise access and/or make available any technology incorporated in this product. The music, talk, news, entertainment, data, and other content on the Services are protected by copyright and other intellectual property laws and all ownership rights remain with the respective content and data service providers.
FCC Statement The user is cautioned that changes or modifications not expressly approved by SIRIUS XM Radio Inc. can void the user’s authority to operate this device. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.
Copyrights and Trademarks ©2009 SIRIUS XM Radio Inc. SIRIUS, XM and all related marks and logos are trademarks of SIRIUS XM Radio Inc. and its subsidiaries. All other marks and logos are the property of their respective owners. All rights reserved. Visit sirius.com/siriuslineup for updates. All programming/channel lineup/SIRIUS service subject to change or preemption. Hardware, subscription and activation fee required. Other fees and taxes will apply.
Owners Record Owner’s Record The model number is located below and the SIRIUS ID is located on the label on the back of the Stratus 6. Record the SIRIUS ID in the space provided below. Refer to these numbers whenever you call your dealer regarding this product.
sirius.com SIRIUS XM Radio Inc. 1221 Avenue of the Americas New York, NY 10020 1.888.539.7474 © 2009 SIRIUS XM Radio Inc.
