Satellite Radio Receiver User Guide

2 Attach the Rubber Tail to the antenna

and press the antenna cable into the

Rubber Tail. The Rubber Tail will help

to position the antenna the correct

distance from the edge of the roof or

trunk lid.

3 Clean the surface of the selected

mounting location using the alcohol

preparation pad and let it dry

thoroughly.

4 Follow the Tips and Cautions shown

on the next several pages, and place

the antenna in the location you

selected. Peel the protective material from the adhesive strips and

press the Rubber Tail firmly into place on the vehicle.

5 Continue to press firmly down on the Rubber Tail for another 30

seconds. At room temperature (68° F), maximum adhesion usually

occurs within 72 hours. During this period, avoid car washes and other

contact with the antenna and the Rubber Tail.

Vehicle Installation

Rubber

Antenna

Tail

Protective

Material

Strain

Relief

Antenna Cable

Magnetic Mount Antenna

(Upside-Down)