Satellite Radio Receiver User Guide

4 Clean the surface with the alcohol preparation pad and let it dry

thoroughly.

5 Peel off the adhesive liner. Position,

press, and hold the Dash Mount and

PowerConnect Vehicle Dock in place for

30 seconds.

IMPORTANT! Allow the Dash Mount adhesive

to cure (dry) for a minimum of 2-4 hours before using the mount. The best

adhesion occurs after 24 hours.

6 The dock mounting plate can be tilted in different directions.

Adjust as necessary for your particular vehicle. When the

orientation is correct, tighten the knob.

TIP! To remove, carefully lift the adhesive pad with your ﬁngers or a spoon.

Warming the pad with a hair dryer for several minutes will help soften the

adhesive.

Knob Adhesive Foot Dock Mounting

Plate