ASSEMBLY INSTRUCTION Sunbed 220cm WF198979; WF198980 WF198981; WF198982 Notice: 1. 2. 3. 4. 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. Place the item on a flat ground to adjust and make sure it remains stable. Tighten up all screws with tools gradually. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process. 5.
PART LIST A2 A1 Iron bar (1pc) Iron bar (1pc) A4 A3 B1 B2 Iron bar (1pc) Iron bar (1pc) B3 B4 C1 C3 C4 Iron bar (1pc) Iron bar (1pc) E Iron bar (1pc) Iron bar (1pc) D3 D2 D4 Iron bar (1pc) Iron bar (1pc) Iron bar (1pc) D1 Iron bar (1pc) Iron bar (1pc) Iron bar (1pc) C2 Iron bar (1pc) Iron bar (1pc) F Right backrest (1pc) Middle backrest (1pc) 02 / 13
PART LIST H G Bracing frame (2pcs) I Left backrest (1pc) J K Bracing frame (2pcs) M L Bracing frame (2pcs) O Bracing frame (2pcs) Q R T Stool (1pc) V W Cushion (2pcs) Seat base (4pcs) Bracing frame (1pc) Seat base small(2pcs) S Bracing frame (2pcs) Bracing frame (4pcs) N P Bracing frame (2pcs) Bracing frame (1pc) U Cloth umbrella (1pc) X Cushion (1pc) Cushion (2pcs) Cushion (1pc) Y Pillow (3pcs) 03 / 13
HARDWARE 3 2 1 Bolt M6 X 20 24 + 2 pcs (extra 2pcs) 4 48 + 3pcs (extra 3pcs) Ø2 x 6 (8pcs) (16pcs) 9 8 Allen Connector plastic Screws M6 X 12 (2pcs) (7pcs) (12pcs) 12 11 Washer Ø6 X 16 X 1 (2pcs) Eru M6 Washer Ø6 x 14 (7pcs) 10 (8pcs) 6 5 7 Bolt M6 X 25 Bolt M6 X 30 (8pcs) Gaslift (2pcs) 04 / 13
CARTON CONTENT: WF198979: A1 B1 C1 D1 A4 B4 C4 D4 E F K x4 H Y WF198980: G x2 I x2 J x2 L x2 M x2 N x2 Q R S V x2 W Hardware AI INCLUDED BOX-WF198980 WF198981: O x2 X x2 T P Y WF198982: P O x2 U Y 05 / 13
Step 1: Connect right backrest (E),left backrest (H) and middle backrest (F) with bolt (1) ,detail (10) and detail(4). 1 1 4 10 F 6 1 1 H F 1 10 1 10 E H 4 1 1 *8 4 *2 10 *2 E*1 F*1 Step 2: 4 1 1 1 H*1 Connect part from Step 1 and 2pcs seat base (O), with bolt(1),detail (4).
Step 3: Connect part from Step 2 and bracing frame (I), bracing frame (J) with bolt(1), bolt (2) and detail (4). 4 6 F H E O O 1 1 4 2 2 2 2 2 2 J I 1 *2 4 *1 I *1 2 *6 Step 4: J *1 Connect seat base small (P), bracing frame (M), bracing frame (N), bracing frame (L) and bracing frame (G) with bolt (2).
Step 5: Connect seat base (O) ,2pcs bracing frame (K) , bracing frame (I) and bracing frame (R) with bolt(1), bolt (2) and detail (4). 4 6 K K 2 2 2 2 I 2 2 R 2 2 4 2 1 1 2 O 2 O I R K K 1 *2 2 *11 4 *1 I *1 K*2 O *1 R *1 Step 6: Connect seat base (O) ,2pcs bracing frame (K) , bracing frame (J) and bracing frame (Q) with bolt(1), bolt (2) and detail (4).
Step 7: Connect iron bar (A1) , iron bar (A2) , iron bar (A3 ) and iron bar (A4) with screws (7) Part D A2 7 A3 7 7 A1 A4 A2 7 A1 7 *3 A1*1 A2*1 A3*1 A4*1 Step 8: Connect iron bar (B1) , iron bar (B2) , iron bar (B3 ) and iron bar (B4) with screws (7) B3 7 B2 7 Part E 7 B4 B1 7 B3 B2 7 *3 B1*1 B2*1 B3*1 B4*1 Step 9: Connect iron bar (C1) , iron bar (C2) , iron bar (C3 ) and iron bar (C4) 9 with screws 9 (7) 7 C2 C3 7 7 Part F C1 C4 7 C3 C4 7 *3 C1*1 C2*1 C3*1 C4*1 09 / 13
Step 10: Connect iron bar (D1) , iron bar (D2) , iron bar (D3 ) and iron bar (D4) with screws (7) Part G D2 7 D3 7 7 D1 D4 7 D3 D4 7 *3 D1*1 D2*1 D3*1 D4*1 Step 11: Thread the detail of Step (7), Step (8), Step (9) , Step (10) into the cloth umbrella (T).
Step 12: Connect part from Step (3) and Step (11) with bolt (3),washer (5) , eru (6) and washer (11) Part D Part E x2 Part F Part G 5 11 3 5 3 3 6 6 6 Outside 6 5 3 Inside H Part D Part E Part F Part G Part A T Part B Part C Part A 3 *8 5 *16 6 *8 11 *8 E *1 H*1 T*1 11 / 13
Step 13: Connect part from Step (3) and Step (12) with gaslift (12) Outside Part D Part E Part G E Inside 12 E Part D 12 12 E 12 *2 12 / 13
Step 14: Connect details together by Connector plastic (8). 8 8 8 8 8 8 8 8 8 8 *7 Step 15: Put on sunbed seat cushions (U) (W) (V) (X) and pillow (Y) to complete sunbed.
