Instructions / Assembly

Step 1. Frame Assembly
Lay out all frame parts on a dry flat surface as shown in FIGURE 1. Make sure the side with holes on the
steel tubing parts face UP for springs installation.
Make sure that you have plenty of space and a clean dry area suitable for the assembly of this trampoline. It
should be assembled where the trampoline is to be used. The trampoline can become unstable if it is moved
after it is assembled. IT IS ESSENTIAL THAT THE INTENDED SITE FOR THIS TRAMPOLINE IS
COMPLETELY FLAT AND LEVEL. If the ground is uneven, this could cause movement in the frame and
stress on the joined sections of the frame, which may damage the trampoline and/or cause serious injury.
FIGURE 1
1
1
1
1
1
1
2
2
2
2
2
2
Assembly and Installation Instructions
3
3
3
5