Instructions / Assembly

Table Of Contents

Step 4. Springs Assembly

Attach two more springs in the midpoint between the corner rails. For even distribution of tension and easy

assembly, the springs must be placed on the opposite sides of the mat in an alternating manner, i.e. Position

3,4 then Position 21,22. Continue in this manner until all the springs are installed as shown in FIGURE 4.

Hint: The number of triangle-rings sewn onto the Mat is equal to the number of holes on the frame. If you

notice that you have miscounted a hole or a triangle-ring, remove and reinstall the springs is necessary

while maintaining an even distribution of tension as explained above.

FIGURE 4

Mat

Rail