Installation Guide

Faucet Installation
E
C
A
A. Turn off the water supply. Remove the
faucet with the mounting hardware
attatched from the package.
*An optional matching side spray is also available.
B. Remove all mounting hardware from
the faucet handle shanks.
*Coupling nut and cone washer are optional for this
installation depending on your waterline connection.
D
B
2
Installation Guide
shank
washer
lock nut
*coupling nut
*cone washer
lock nut
quick connect
F
C. Insert the shank of the faucet handle body
into the hole of the sink deck.
From the underside of the sink or
mounting surface, attach the gasket and
washer, followed by the lock nut, onto the
shank.
D. (1) Using a phillips screw driver (2) tighten
the mounting screws untill secure.
(3) Lower the the lock nut to onto the
mounting surface (4) followed by the
faucet handle.
Repeat above steps for second faucet handle.
E. Remove all mounting hardware from the
faucet shank.
F. From the underside of the sink or
mounting surface, attach the gasket and
washer, followed by the lock nut, onto
the shank. Tighten mounting screws until
secure.
lock nut
tee tting
gasket
washer
shank
1
2
3
4