Installation Guide

Faucet Installation
E
C
F
A
A. Turn off the water supply. Remove the
faucet with the mounting hardware
attatched from the package.
B. Remove all mounting hardware from
the shank.
D
B
C. Insert the shank of the faucet body into
the holes of the sink deck.
D. From the underside of the sink or
mounting surface, attach the washer,
followed by the lock nut, onto the shank.
E. Hand-tighten the lock nut until secure.
F. Tighten mounting screws using a phillips
head screwdriver until secure.
2
Installation Guide
shank
washer
lock nut
mounting
screws