Installation Guide

Faucet Installation
E
C
F
A
A. Turn off the water supply. Remove the faucet
and faucet handles with the mounting
hardware attached from the package.
B. Insert an allen wrench into the faucet handle
body removing the set screw. Separating
the valve body from the handle body.
D
B
C. Unscrew the lock nut and separate the
handle base from the rest of the valve body.
D. From the underside of the sink or mounting
surface, attach the gasket and washer,
followed by the lock nut, onto the shank.
Insert the shank of the faucet handle body
into the hole of the sink deck.
E. Tighten mounting screws below until secure.
Replace the handle retainer followed by the
faucet handle.
F. Replace the faucet handle set screw
followed by the set screw cover.
2
Installation Guide
shank
lock nut
set screw
cover
set screw
valve body
mounting
screws
*coupling nut
*cone washer
handle retainer
lock nut
washer
gasket