Installation Guide

Faucet Installation
2
Installation Guide
E
C
F
A
A. Turn off the water supply. Remove the
faucet with the mounting hardware
attatched from the package.
B. Remove all mounting hardware from
the shank.
D
B
C. Insert the shank of the faucet body into
the hole of the sink deck.
D. From the underside of the sink or mounting
surface, attach the gasket and washer,
followed by the lock nut, onto the shank.
E. Hand-tighten the lock nut until secure.
F. Tighten mounting screws using a phillips
head screwdriver until secure.
shank
washer
lock nut
mounting
screws
gasket