Installation Guide

Faucet Installation
E
G
C
F
A
A. Turn off the water supply. Remove the
faucet with the mounting hardware
attatched from the package.
B. Remove all mounting hardware from
the shanks.
D
B
C. Insert optional base plate if applicable.
Followed by base plate gasket.
D. Insert the shanks of the faucet body along
with the water supply lines into the hole of
the sink deck.
E. From the underside of the sink or mounting
surface, attach the mounting hardware,
onto the shanks.
F. Hand tighten nuts on to both shanks until
secure.
2
Installation Guide
mounting
hardware
shanks
tube wrench
H
G. Insert tube wrench on to nut.
H. Tighten nut hardware until secure using the
supplied tube wrench by using a phillips
head screw driver to turn.
sink deck