Installation Guide

Faucet Installation
E
C
A
A. Turn off the water supply. Remove the
faucet with the mounting hardware
attatched from the package.
B. Remove all mounting hardware from
the shank.
D
B
C. Insert the shank of the faucet body into
the hole of the sink deck.
D. From the underside of the sink or
mounting surface, attach the washer,
followed by the lock nut, onto the shank.
E. Attach the opposite end of each hose
to the corresponding water supply lines
by tightening the 3/8" compression ttings
onto the lines. Secure all ttings with a 1/4
turn of a wrench.
2
Installation Guide
shank
washer
lock nut
3/8” compression
tting
Water suppy lines
sink deck
Tighten screws to until secure.
mounting
screws