Installation Guide

Faucet Installation
E
C
F
A
A. Turn off the water supply. Remove the
faucet with the mounting hardware
attatched from the package.
B. Remove all mounting hardware from
the shank.
D
B
C. Insert optional base plate if applicable.
Followed by the base plate gasket.
D. Insert the shank of the faucet body into the
holes of the sink deck.
E. From the underside of the sink or mounting
surface, attach the washer followed by the
lock nut, onto the shank.
F. Hand-tighten the lock nut until secure.
2
Installation Guide
shank
washer
lock nut
sink deck