Installation Guide
Faucet Installation
E
C
F
A
A. Turn off the water supply. Remove the          
 faucet with the mounting hardware   
 attatched from the package.
B. Remove all mounting hardware from  
 the shank.
D
B
C. Insert optional base plate if applicable. 
Followed by the base plate gasket.
D. Insert the shank of the faucet body into the 
holes of the sink deck.
E. From the underside of the sink or mounting 
surface, attach the washer followed by the 
lock nut, onto the shank.  
F. Hand-tighten the lock nut until secure.
2
Installation Guide
shank
washer
lock nut
sink deck




