Installation Guide

Side Spray Installation
3
Installation Guide
Side Spray Installation
A. Insert spray hose assembly (1) to far right hole on the sink,
hand tighten with lock nut from underneath.
B. Insert spray hose (2) down hose assembly.
C. Connect male end (3) with spray and hand tighten.
Assembly
E. Clean installation site, remove debris from the area.
F. Remove mounting nuts (4) and nut gasket (5) while
keeping gasket (6) attached.
G. Pull spray hose (7) through sink center hole and connect
with quick connect connection. (8)
Mounting
H. Place faucet onto sink and attach nut gasket (3) then
mount nuts (5). Tighten to secure.
1
3
2
6
5
4
8
7
Replacing plug with supplied Quick Connect connection.