Inc. Power Screwdriver User Manual

Model 5050N5051 Al5050AL
Form # Z356D
Serial "C"
1 /2" Pistol Grip Twin
Hammer
Imoact Wrenches
-
Operator Instructions Important
Read these instructions carefully before installing, operating,
Includes - Foreseen Use, Work Stations, Putting Into Service,
servicing or repairing this tool. Keep these instructions in a safe
Operating, Dismantling, Assembly and Safety Rules.
accessible place.
f
Sioux Tools, Inc.
1 17 Levi Drive
Murphy, NC 28906
U.S.A.
Tel No. 828.835-9765
Fax No. 828-835-9685
Produd Type
1/2" Pistol Grip Twin
Hammer Impact Wrenches
Model No/Nos
5050A Chrome Nose Case
5051 A Black Nose Case
5050AL 2" Ext. Anvil
Product Net Weight
5050N5051 A 5050AL
5.60 5.80 Ibs
2.50 2.60 Kq
Recommended Use Of
Balancer Or Support
Air Pressure
Recommended Working 6.2 bar
90 PSI
Maximum
6.2 bar 90 PSI
Recommended Hose Bore
Size - Minimum
3/8ins 10mm
Serial No.
Recommended Max.
Hose Length
30Ft 10M
Noise Level: Sound Pressure Level 89.0 dB{A)
Sound Power t-evet 100.0 <tB{A)
Test Method: Tested in accordance with Pneurop
test code PN8NTC1 and IS0 Standard 3744
i
Page No 1
SAFETY MESSAGES
Peisonaf Safety Equipment
Use - Safety Glasses YES
Use - Safety Gloves
Use - Safety Boots
Use - Breathing Masks
Use - Ear Protectors YES
Safety rules when using 5050A,
5051A and 5050AL Impact Wrenches
- Use only impact sockets and extensions, universal joints,
etc. rated as being suitable far use with impact wrenches.
- Prolonged exposure to vibration may cause injury.
-Read all instructions before using this toot. Ail
operators must be fuHy trained in its use and aware of
these safety rules.
- Do not exceed the maximum working air pressure.
- Use personal protection equipment as recommended.
- Some dust created by power sanding, sawing, grinding,
drilling,
and other construction activities contains
chemicals known to cause cancer, birth defects and other
reproductive harm.
-Use only compressed air at the
recommended conditions.
away from the working attachment fixed to the tool.
-The tool is not electrically insulated. Never use the too)
if there is any chance of coming into contact with live
electricity.
-Always
when using the tool, adopt a firm footing and/or
position and grip the tool sufficiently only to overcome any
reaction forces that may result from the tool doing work.
Do not overgrip.
-Use only correct spare parts for maintenance and
repair. Do not improvise or make temporary repairs. Major
servicing and repairs should only be carried out by
persons trained to do so.
-Do not lock, tape, wire, etc. the 'On/Off' valve in 'On'
position. The trigger/lwer, etc. must always be free to
return to the 'Off' position when released.
A WARNING
Always Read Instructions
~efore using -TOOIS
@ NGw-v
Wear Hearing Protection
Amid Prolonged Exposure
A mmm
Vibration Level (5050A15051 A)
4.0 Meters 1 Sec2
(5050AL) 4.3 Meters I Sec2
Test Method: Tested in accordance with IS0
standards 8662 Parts 1 & 7
-If the tool appears to malfunction,
remove from use immediately and
arrange for
service and repair. If it is not
practical to remove too! from service,
then shut off the air supply to the tool
ft! Pipa And Fittings
swH bw
and write OF have written a warning note
and attach it to the toot.
- If tool is to be used with a balancer or
other suspension device, ensure that
the tool is firmly attached to the
suspensiodsupport device.
When operating the tool, always keep
the body and particularly the hands
Recommended Air Supply System
Figure 1