Submittal Sheet
MANIFOLD – ASTM F1807 PEX
672 SERIES
SPECIFICATION
Sioux Chief ASTM F1807 PEX BranchMaster™ manifolds shall be used in
plumbing or heating systems for safe distribution of hot or cold water to supply
fixtures and shall be utilized in various design configurations. Manifolds shall be
designed in accordance to the ASTM F1807 PEX standard and shall be offered
with or without valves on branches. Each manifold shall be manufactured with
no-lead solder or brazing and tested by Sioux Chief prior to shipment.
INSTALLATION
Hot water manifolds should be located within the first six feet after a water
heater to aid in hot water delivery times. Recirculation lines should be run into
an independent fitting and not directly into the manifold.
MATERIALS
Trunk: Type L copper
End outlet: copper or C69300* brass
Branch: copper or C69300* brass
Solder: No Lead
*693 brass used in brazed congurations
CERTIFICATIONS/APPROVALS
NSF-372 compliant, IAPMO listed
NSF-14 end connections (brass)
Note: connection specifications are limited to those called out in their respective
ASTM standards for pipe and fittings.
BranchMaster
™
672X0490
Note: Not all option combinations are STOCK manifolds.
For non-stock manifolds, a minimum of 25 pcs is required
and extended lead times may apply.
X = F1807 branch (copper)
XB = F1807 PEX balancing valve, Brass
XV = F1807 PEX ball valve - Brass
C = compression PEX
CB = comp. PEX balancing valve, Brass
CV = comp. PEX valve, Brass
BRANCH TYPE A
10 = 1" Type-L copper, 1" female sweat × spun closed
10L = 1" Type-L copper, 1" female sweat × spun closed, valve left
30 = 1" Type-L copper, ¾" male sweat × spun closed
31 = 1" Type-L copper, ¾" female sweat × ¾" male sweat
33EE = 1" Ty pe - L copper, ¾" male sweat ×
¾" male sweat (extended trunk ends)
40 = 1" Type-L copper, 1" male sweat × spun closed
41 = 1" Type-L copper, 1" male sweat × 1" female sweat,
42 = 1" Type-L copper, 1" male sweat × 1" female sweat
44 = 1" Type-L copper, 1" male sweat × 1" male sweat
70 = 1" Type-L copper, 1" PEX × spun closed
77 = 1" Type-L copper, 1" PEX × 1" PEX
80 = 1" Type-L copper, ½" PEX × spun closed
90 = 1" Type-L copper, ¾" PEX × spun closed
90EE = ¾" PEX × spun closed (extended trunk ends)
97 = 1" Type-L copper, ¾" PEX × 1" PEX
98 = 1" Type-L copper, ¾" PEX × ½" PEX
99 = 1" Type-L copper, ¾" PEX × ¾" PEX
C0 = 1" Type-L copper, 1" CPVC × spun closed
TRUNK TYPE C
Create Item Number
672A B C
e.g. 672X0490: 1" Type-L copper trunk, four ½" ASTM F1807 PEX branches, ¾" PEX inlet x spun closed
Made in U.S.A.
02 = 2 branches
03 = 3 branches
04 = 4 branches
05 = 5 branches
06 = 6 branches
08 = 8 branches
10 = 10 branches
12 = 12 branches
13 = 13 branches
15 = 15 branches
18 = 18 branches
Branches are 2" on center
BRANCH MULTIPLES B
672X0699
Sioux Chief Manufacturing Company | P: 1.800.821.3944 | F: 1.800.758.5950 | www.siouxchief.com
7-20
ITEM # SUBMITTED �����������������������������������������
JOB NAME �����������������������������������������������
LOCATION �����������������������������������������������
ENGINEER �����������������������������������������������
CONTRACTOR ��������������������������������������������
PO# ������������������������ TAG ������������������������