Submittal Sheet

MANIFOLD – ASTM F1807 PEX CRIMP
TM
672 SERIES
SPECIFICATION
Sioux Chief ASTM F1807 BranchMaster™ manifolds shall be used in plumbing or
heating systems for safe distribution of hot or cold water to supply xtures and
shall be utilized in various design congurations. Manifolds shall be designed
in accordance to the ASTM F1807 standard and shall be offered with or without
valves with various outlet multiples. Each manifold shall be manufactured with no
lead solder or braze and tested by Sioux Chief prior to shipment.
INSTALLATION
Hot water manifolds should be located within the rst six feet after a water
heater to aid in hot water delivery times. Recirculation lines should be run into an
independent tting and not directly into the manifold.
MATERIALS
Trunk: Type L copper
End outlet: copper or C69300* brass
Branch: copper or C69300* brass
Solder: No Lead
*693 brass used in brazed configurations
CERTIFICATIONS
NSF-372 compliant, IAPMO listed
NSF-14 end connections (brass)
Note: connection specifications are limited to those called out in their respective ASTM standards for
pipe and fittings.
PowerPEX
®
BranchMaster
™
672X0490
672X0699
Additional options available at www.siouxchief.com.
672XV0590
02 = 2 branches
03 = 3 branches
04 = 4 branches
06 = 6 branches
08 = 8 branches
10 = 10 branches
12 = 12 branches
13 = 13 branches
BRANCH MULTIPLES B
X = F1807 branch NL (No Lead)
XB = F1807 PEX balancing valve
XV = F1807 branch & valve
C = compression PEX
CV = comp. PEX valve
CB = comp. PEX balancing valve
BXT = slab manifold/multi-port tee
MANIFOLD TYPE A
10 = 1" L, 1" female sweat × spun closed
10L = 1" L, 1" male sweat × 1" female sweat, valve left
30 = 1" L, ¾" male sweat × spun closed
31 = 1" L, ¾" female sweat × ¾" male sweat
31B3 = 1" L, 1" female sweat × 1" male sweat
(½" PEX branches on 3" centers)
33EE = 1" L, ¾" male sweat ext × ¾" male sweat ext
40 = 1" L, 1" male sweat × spun closed
41 = 1" L, 1" male sweat × 1" female sweat,
(½" PEX branches on 2" centers)
42 = 1" L, 1" male sweat × 1" female sweat
44 = 1" L, 1" male sweat × 1" male sweat
70 = 1" L, 1" PEX × spun closed
77 = 1" L, 1" PEX × 1" PEX
80 = 1" L, ½" PEX × spun closed
90 = 1" L, ¾" PEX × spun closed
90EE = 1" L, ¾" PEX ext × spun closed ext
97 = 1" L, ¾" PEX × 1" PEX
98 = 1" L, ¾" PEX × ½" PEX
99 = 1" L, ¾" PEX × ¾" PEX
C0 = 1" L, 1" CPVC × spun closed
TRUNK TYPE C
Create Item Number
672A B C
e.g. 672X0490: 1" L copper trunk, four ½" ASTM F1807 no lead branches, ¾" PEX inlet x spun closed
Made in U.S.A.
Sioux Chief Manufacturing Company | P: 1.800.821.3944 | F: 1.800.758.5950 | www.siouxchief.com
10-17
ITEM # SUBMITTED �����������������������������������������
JOB NAME �����������������������������������������������
LOCATION �����������������������������������������������
ENGINEER �����������������������������������������������
CONTRACTOR ��������������������������������������������
PO# ������������������������ TAG ������������������������