Operation Manual

CycleBasic adjustments
46
x Adjust to automatic mode to switch on the light sensor.
Depending on the lighting model, the rear lamp on your cycle may have a standing light
feature which allows the rear lamp to remain lit for several minutes even when you stop
riding. This feature does not need to be switched on separately.
There are various types of headlamp with different switch options.
Have your dealer explain how they are operated and how they function.
4.7.2 Battery-powered and rechargeable lighting
Depending on the lighting model, the headlamp and rear lamp may be equipped with
different switches and need to be operated independently of each other.
x Switch the lighting on and off by operating the relevant switch.
x Refer to the information enclosed by the manufacturer about operating and fitting
battery-powered and rechargeable lighting.
4.7.3 Headlamp
1. Switch on the headlamp.
2. Adjust the headlamp so that, at a
distance of 5 m in front of the head-
lamp, the light beam reaches a point
only half as high as at its starting point
(see “Illustr.: Adjusting the headlamp”).
x An incorrectly adjusted headlamp
can dazzle other road users.
4.7.4 Rear lamp
A rear lamp must be installed in an easily visible location at the back of the cycle.
x Check that the rear lamp is functional before riding off.
4.7.5 Reflectors
Reflectors must be installed in an easily visible location on the cycle and must not be
obscured. Generally, reflectors are located on the pedals, the tyres, the rear lamp and
the headlamp.
x Check that all reflectors are undamaged and visible before riding off.
Illustr.: Adjusting the headlamp (example)
100 %
50 %
5 m