Operation Manual

CycleBasic adjustments
40
4.4 Controls
Controls (e.g. the bell, brake levers, gear shifting system, etc.) must be arranged so that
they can be operated easily while riding, without distracting you from the road, and if
possible without taking your hands off the handlebar grips.
x Have the controls adjusted by your dealer if you lack the necessary expertise or the
tools required.
4.5 Brake lever
WARNING
Loss of brake power due to incorrectly adjusted brakes.
Risk of accident and injury!
x Have brake adjustments carried out by your dealer only.
x Do not make any adjustments to the brakes if you lack the
necessary expertise or the tools required.
x Adjustments to the brake system are highly complex and require expertise. Have
your dealer carry out the adjustment.
4.5.1 Adjusting the position
The position of the brake levers must be
custom-adjusted so that the levers can be
operated easily and safely.
x Loosen the brake lever fastening by
turning the brake lever screw
anticlockwise (see “Illustr.: Brake lever
position”).
x Position the brake lever at a point
where your fingers, wrist and arm are in
line and your fingers are resting com-
fortably on the brake lever, and where
you can pull the lever safely.
x Tighten the brake lever screw by turning it clockwise. Ensure that the torque is
correct.
Illustr.: Brake lever position (example)