Operation Manual

Cycle Maintenance
135
14.12.4.5 Changing brake pads
NOTE
Uneven brake pad wear due to changing the brake pads
incorrectly.
Risk of damage!
x Always change brake pads in pairs.
x Use brake pads of the same type.
x Adjust the brakes after every change.
NOTE
Loss of brake fluid and damage to the brake due to operating the
brake lever when the brake pads or wheels are removed.
Risk of damage!
x Never operate the brake lever while the wheel, brake block
holders or brake pads are removed.
1. Remove the wheel (see the “Wheels and tyres / Fitting and removing the front/rear
wheel” chapter).
2. Remove the circlip from the screw and loosen it, or bend the ends of the pin
together and pull it out.