Operation Manual

Cycle Maintenance
105
Please note that in the event of guarantee claims, Winora-Staiger GmbH/Haibike USA
reserve the right to check whether the fault which occurred could have been avoided
through proper maintenance. Depending on the result, we reserve the right to reject the
guarantee claim if necessary.
Your cycle has a variety of parts that require particular attention, especially with regard to
their exposure to dirt, dust or moisture, or simply because of their relevance to safety.
It is therefore in your own interest to observe the inspection intervals.
14.2 Screw joints
x Check the cycle for loose screw joints (visual inspection).
x Do not ride the cycle if you find loose screw joints.
x Have loose screw joints checked by your dealer if you lack the necessary
expertise and the tools required.
14.3 Frame and rigid fork
x Check the frame and rigid fork for cracks, deformation or discolouration.
x If the frame or the rigid fork is cracked, deformed or discoloured, contact your
dealer immediately.
x Do not use the cycle if you find any cracks, deformation or discolouration.
14.4 Suspension fork
x Check the suspension fork for cracks, deformation or discolouration.
x If the suspension fork is cracked, deformed or discoloured, contact your dealer
immediately.
x Compress and extend the suspension fork.
x If you hear unusual noises or the suspension fork gives way without any
resistance, have it checked by your dealer.
x Clean and oil the suspension fork (see the “Cleaning” chapter).