Operation Manual

Cycle Wheels and tyres

3. Screw the thru-axle into the hub axle

nut by turning it clockwise with the lever

until hand-tight.

x Make sure that the front/rear wheel

can then no longer move sideways.

4. Afterwards, pull the lever into position so

that it touches the front fork.

Models with closed fork ends:

1. Align the front/rear wheel between the fork ends so that the fork ends and wheel

hub form a straight line.

x If applicable, follow the specifications regarding the front/rear wheel running

direction. This specification generally relates to the tyre tread and can be found

on the sidewall of the tyre. Push the thru-axle through the fork ends and the

wheel hub.

2. Screw the thru-axle into the hub axle nut by turning it clockwise with the lever until

hand-tight.

x Make sure that the front/rear wheel cannot move sideways.

3. Afterwards, pull the lever into position so that it touches the front fork.

10.3.3.2 Removal

Models with open fork ends:

1. Loosen the hub axle nut until you can move the thru-axle between the fork ends.

2. Remove the front/rear wheel and thru-axle from the fork ends.

Models with closed fork ends:

1. Unscrew the thru-axle from the hub axle nut.

2. Secure the front/rear wheel.

3. Pull the thru-axle out of the fork ends and wheel hub.

4. Remove the front/rear wheel.

Illustr.: Wheel with a lever-type thru-axle

(example)

1 Hub axle nut

2 Thru-axle lever