Operation Manual

Cycle Wheels and tyres
87
10.3.1.2 Removal
Models with open fork ends:
1. To unfasten the quick-release axle, pull the axle lever outwards.
2. Remove the front/rear wheel from the fork ends.
Models with closed fork ends:
1. To unfasten the quick-release axle, pull the axle lever outwards.
2. Unscrew the quick-release axle from the quick-release adjusting nut and remove
the nut.
3. Secure the front/rear wheel.
4. Pull the quick-release axle out of the fork ends and wheel hub.
5. Remove the front/rear wheel.
10.3.2 Front/rear wheels with conventional thru-axles
10.3.2.1 Fitting
Models with open fork ends:
1. Push the thru-axle through the wheel
hub and give the hub axle nut one or
two turns to screw it onto the thru-axle.
2. Insert the front/rear wheel and thru-axle
into the fork ends.
x If applicable, follow the
specifications regarding the front/
rear wheel running direction.
This specification generally relates
to the tyre tread and can be found
on the sidewall of the tyre.
3. Fix the hub axle nut in place using a
suitable tool and tighten the thru-axle
by turning it clockwise with a torque
wrench.
1
2
Illustr.: Wheel with a thru-axle (example)
1 Hub axle nut
2 Thru-axle