Operation Manual

CycleBasic adjustments

4.2.2 Minimum insertion depth

Seat posts have a minimum insertion depth marked on their tubing, and must be

inserted up to at least this point in the seat tube.

WARNING

Cracking or breakage to the seat tube due to shortening the seat post.

Risk of accident and injury!

x Observe the minimum insertion depth for the seat post.

x Never shorten the seat post.

x Observe the minimum insertion depth

for the seat post. The marking on the

seat post must not be visible

(see “Illustr.: Seat post minimum

insertion depth”).

x Have the saddle height adjusted by your

dealer.

4.2.3 Adjusting the minimum pull-out height

The minimum pull-out height is the minimum height to which the seat post must be pulled out

of the seat tube. This chapter applies to S-pedelecs and cycles with telescopic seat posts.

NOTE

Failure to observe the minimum pull-out height.

Risk of damage!

x Adjust the height of the saddle so as not to damage any

cables or connecting wires inside the seat tube.

x With S-pedelecs, pull the seat post out far enough that the

lighting components are not obscured by any license plate

which may be fitted to the saddle.

Illustr.: Seat post minimum insertion depth

(example)

1 Seat post clamp

2 Minimum insertion depth marking