Operation Manual

Balance bike Basic adjustments
11
WARNING
Material fatigue and material breakage due to tightening screw
joints incorrectly.
Risk of accident and injury!
x Have your dealer tighten loose screw joints.
x Loose screw joints must be properly tightened to the correct
torque using a torque wrench.
The dealer will fully assemble the balance bike and adjust the saddle to your child’s height.
x When you receive the balance bike, check whether your child can ride it
comfortably and safely, and that the adjustments fit your child.
x If you lack the necessary expertise and the tools required, have adjustments
carried out by your dealer.
x If you make adjustments yourself, ask your dealer about the applicable torques
and use a torque wrench.
x If you make adjustments yourself, check them properly and thoroughly before
you allow your child to use the balance bike.
7.1 Adjusting the saddle
WARNING
Material breakage or damage to the seat post due to a lack of
knowledge when making adjustments.
Risk of accident and injury!
x Have the seat post adjusted by your dealer.
x Do not adjust the seat post yourself if you lack the necessary
expertise and the tools required.
x If you adjust the seat post yourself, ensure that the marking
on the post is not visible.
The saddle height must be adjusted so that the balance bike is adapted to suit the size
of the child.