Operation Manual

CycleMaintenance
136
3. Pull the brake pads out of the brake
calliper.
4. Clean the brake pistons with a clean
cloth.
5. Press both brake pistons into the brake
calliper simultaneously with a brake
piston spreader.
6. Remove the used brake pads from the
retaining bracket and clean the bracket
with a clean cloth.
7. If applicable, follow the specification on the new brake pads regarding the direction
of travel or whether they are for the left or right-hand side, and insert the new brake
pads in the brake calliper with the retaining bracket.
8. Push the brake pad screw or pin through the brake pad and holder eyes and into
the brake calliper.
9. Tighten the screw, observing the applicable torque, and secure it with the circlip or
bend the ends of the pin apart.
10. Fit the wheel.
2
1
1
2
3
Illustr.: Brake calliper with a screw (example)
1 Brake pad screw
2 Screw circlip
3 Brake pads
Illustr.: Brake calliper with a pin (example)
1 Pin
2 Brake pads
Illustr.: Disc brake pad (example)