Operation Manual

Cycle Cleaning
101
13.3 Gear shifting system
NOTE
Incorrectly chosen grease, oil and care products can damage the
components.
Risk of damage!
x Consult your dealer about the use of greases, oils and care
products, particularly with derailleur shifting systems.
x Do not use water for cleaning, and do not use chemical brake
cleaners or thinners.
x Do not use gun oil or rust removal spray.
x Clean the controls for the gear shifting
system with a damp cloth.
x Clean the moving components in
derailleur shifting systems with a damp
cloth or a soft brush, provided they are
easily accessible (see “Illustr.: Moving
components of a derailleur shifting
system”).
x Oil the moving components in derailleur
shifting systems with a little universal oil
after cleaning, provided they are easily
accessible.
x Then remove excess oil with a clean
cloth.
13.4 Chain
x If the cycle is equipped with an all-round chain guard, have your dealer explain how
to remove and fit the guard, or have them remove and fit it for you.
Remove dirt from the bike chain with a clean cloth, lightly oiled if necessary.
x Remove dirt from the sprockets and chainrings with a small, soft brush.
x Oil the chain with a little universal oil at regular intervals, after cleaning and after
riding in the rain.
x Contact your dealer regarding stubborn dirt.
Illustr.: Moving components of a derailleur
shifting system (example)
1 Rear derailleur
2 Jockey wheels
3 Chain adjuster
1
3
2