Operation Manual

CycleCleaning

100

13.2 Suspension

If the cycle is equipped with a suspension fork, a suspension seat post or rear

suspension:

1. Remove dirt from the sliding surfaces and the adjacent seals immediately with a

clean cloth, lightly oiled if necessary (see “Illustr.: Suspension fork sliding surface”

and “Illustr.: Suspension seat post sliding surface”).

2. Oil the sliding surface with a little universal oil after cleaning.

3. Compress and extend the suspension five times. Then remove excess oil with a

clean cloth.

Illustr.: Suspension seat post sliding surface (example)

1 Sliding surface

Illustr.: Suspension fork sliding surface (example)

1 Sliding surface