User's Manual

34
When appears on the interface,
indicates that the camera is out of control of the remote controller at the moment.
indicates that the camera is under the control of one remote controller at the moment.
In case of successful pairing between the camera and the remote controller (the camera is capable of memorizing the remote controller paired
successfully last time):
1. If the camera is turned off, the camera is turned on to automatically start recording by pressing and holding the button.
2. The camera is turned on or whether the remote controller is paired successfully is tested by short pressing the
button. The camera will be turned off by pressing and
holding the
button (more than 1.5 seconds).
3. When the
button on the camera is pressed to start recording, the 
remote controller. Then, the
button on the camera is pressed again to stop recording.
4. When the
button on the remote controller is pressed to start recording or shooting, the camera functions in recording or shooting according to the current setting of
the remote controller.
Indicator lamp status description:
1. If pairing succeeds, the RF signal indicator lamp turns to green.
2. If pairing fails, the RF signal indicator lamp turns to red.
3. During remotely controlled recording or shooting, the shooting status indicator lamp turns to orange.
4. When the electric quantity of the battery of the camera is less than 25% or the memory card is full, the battery/memory card indicator lamp turns to red.
RF connection will be automatically interrupted if the Wi-Fi (NFC), HDMI connection or computer connection of the camera are on.
If the Wi-Fi (NFC), HDMI connection or computer connection of the camera are already on, the RF function is unavailable.