Installation Guide
Bath Sinks: Vessel
3. Apply Sinkology antique brown or clear neutral cure 100%
silicone (#SINSTALL-101) to the edge of the hole and mount sink
into place. Apply plumbers putty on the underside of the drain
lip and assemble the drain.
4. Place the large steel mounting
washer over the drain pipe
and tighten the brass locknut
untilthesteelwasherisrmly
attached to the underside
of the countertop, holding
the entire sink in place. See
diagram.
5. For a professional look add
a bead of Sinkology antique brown or clear neutral cure 100%
silicone around the base of the sink.
6. For regular maintenance simply wash with gentle soap and
water. For extra protection against water spotting, use Sinkology
Copper Armor care kit (#SARMOR-101) or high quality carnauba
wax.
11
Vessel sinks are an easy way to add character and style to any
bathroom. Vessel sinks install directly on top of your countertop
and are reminiscent of old wash basins. This unique and luxurious
sink style is easy to install and are available in a wide variety of styles
andnishes.
1. Flip sink upside down and trace outside edge onto craft paper
or cardboard. Mock up any plumbing connections and faucet
placement to ensure necessary clearances. Cut out template
and place on the countertop.
Mark the center location of
the sink on the countertop.
2. Drill a 2 ¾” inch diameter
hole in your countertop
at the center mark. A
1/8th inch beveled edge
is recommended, but not
necessary. See diagram.
Important
Sinkology copper vessel sinks are designed to be installed securely in
a 2-3/4” inch hole in the countertop. Sinkology does NOT recommend
vessel mounting rings.
PRO
DIY