Installation Guide

Kitchen&BarSinks:Undermount

Undermount kitchen sinks are recommended when installing new

granite or solid surface countertops. Undermount installation adds

a luxurious and professional look to kitchen design and maximizes

countertop space. By installing your Sinkology kitchen sink under-

counter it makes wiping countertops easy and helps during kitchen

clean up.

1. Flip sink upside down on

a sheet of craft paper or

cardboard and trace the

outside rim of the sink. Select

preferred countertop offset.

See diagram. Measure the

distance between the edge of

the basin and the inside edge

of the lip. Add a second line

insidetherstaccordingto

this measurement. Cut out the template along the second line.

2. Place the template onto the countertop and cut the hole into

the countertop.

3. Use clear or Sinkology antique brown neutral cure 100% silicone

(#SINSTALL-101) on the rim of the sink. Mount sink under the

countertop using mounting hardware. Sinkology does not

provide under mounting hardware due to the wide variety of

mountingsurfaceswhichrequirespecichardware.Contactyour

countertopmanufacturerforspecicmountinghardware.

4. Ensuresinkismountedatagainstcountertoponallsides,

adjust hardware as needed.

5. Use plumbers putty to install the drain. Clean excess.

6. To complete your install we recommend applying a thin bead of

Sinkology antique brown or clear neutral cure 100% silicone to

any gaps between sink and countertop.

7. For regular maintenance simply wash with gentle soap and

water. For extra protection against water spotting, use Sinkology

Copper Armor care kit (#SARMOR-101) or high quality carnauba

wax.

Important

Sinkology undermount kitchen sinks do not include mounting hardware.

Werecommendprovidingyoursinkdetailstoyourcountertop

manufacturer for approved mounting hardware and method.

PRO

DIY