User Manual

5
Your Instrument
AEROS Loop Studio: Manual
Plugging an instrument into the AEROS:
The AEROS has two ¼” (6.35mm) Inputs. You can record in stereo using both, or in
mono with one. The two ¼” (6.35mm) outputs function in the same way.
The AEROS does not have phantom power for microphones. This means you may
need a microphone preamp — any preamp will work.
Signal levels:
Before you start recording, play your instruments at the loudest expected level in
the Loop Studio. The signal meter will appear on the right side. If the signal
reaches the red level, turn down your instrument to prevent clipping. The volume
wheel only controls the output level, not the input level.
OUTPUT
L/R
INPUT
L/R