User Manual

23
AEROS Loop Studio: Manual
Settings
Auto Record: In 6x6 pressing Next Track to select the next empty track will start
automatically recording. This saves you from pressing the Record button. If you quick-
ly press Next Track again, AEROS will cancel any recording in the empty track and
cycle back to select track 1. *
Record Next Track: When recording begins. ‘Immediate’ is only available for
non-quantized. ‘End of bar’ is only available for quantized. ‘End of loop’ is available for
both. ‘End of loop’ follows the longest loop recorded in the song part. *
Change Song Part: When the song part is changed. ‘Immediate’ is only available for
non-quantized. ‘End of bar’ is only available for quantized. ‘End of loop’ is available for
both. ‘End of loop’ follows the longest loop recorded in the song part. *
DEVICE SETTINGS
Main input routing: Selects where the live sound going into the Main Input is sent.
You may select one or both:
● Main Out
● Aux Out
Recording source: Selects which input is recorded. You may select one or both:
● Main In
● Aux In
Note: There must at least one recording source.
Loop playback routing: Selects where the Loop Playback is sent. You may select one
or both:
● Main Out
● Aux Out
Note: The loop playback must be sent to at least one output.
Aux In Routing: Selects where the live sound going into the Aux In is sent. You may
select one or both:
● Main Out
● Aux Out
Click Routing: Selects where to send the Click track. You may select none, one, or
both:
● Main Out
● Aux Out
Tip: You can connect a separate speaker to Aux Out so only you hear the click while
the audience hears the Main Out.
Click Volume: How loud the click track is played.
*Feature coming soon. Update your firmware frequently!