User Manual

22
AEROS Loop Studio: Manual
Settings
The settings are divided into two categories.
1. Song-specific settings, which are settings that are saved to a single song.
Once you choose a song-specific setting, with few exceptions (namely, the
“advanced behavior” settings”, you cannot
change them.
2. Device settings, which you can change any time and will apply to every
song.
SONG-SPECIFIC SETTINGS
Song saved to: Save this song to either the internal memory of the Aeros, or to an SD
card *
Number of tracks: How many song parts and parallel loops in each song part there
are. 2x2 gives you 2 song parts with 2 parallel tracks each. 6x6 gives you 6 song parts
with 6 parallel tracks each. 2x2 gives you immediate access to the tracks and song
parts, while in 6x6 you need to select a track or song part before you activate it.
Sync Tracks: Keeps tracks of different lengths synced with each other by making each
track a multiple of the previous track. If track 1 is 3 measures long, track 2 can be 1, 3,
6, 9, etc. measures. If quantize is off, the following track can only be of equal or a
multiple of greater length than the previous track. It is highly recommended to keep
sync tracks on, unless you are doing soundscape or polyrhythm style of looping.
Quantize to measure: Starts and ends recording at the beginning/end of the mea-
sure. This requires a BPM and time signature setting (With BeatBuddy connected
[MIDI Sync On], BPM and Time Signature will be set automatically). *
Time Signature: The left number is how many beats in a measure, the right number
is the time of notes in the measure (quarter notes, eighth notes, etc)
Tempo: Speed of the song. How many beats per minute.
Count in: How many measures of clicks before the Aeros begins recording.
Backing Track: Select a WAV file from the root folder (not in any folder) of the SD
card. This will be loaded in Track 1 and this track will be locked so it will not change
when song parts are changed. We will add the capability to load different backing
tracks to different song parts soon. *
*Feature coming soon. Update your firmware frequently!