User Manual

4
FIRMWARE INSTALLATION
INSTRUCTIONS
• Once you have downloaded the rm
ware, unzip the le.
• You will see 5 les: app, app.bin, boot.
bin, MLO, and MLO.bin.
• Insert SD Card directly into your
computer.
• Drag the contents of the rmware
folder directly onto the SD Card (the rst
window when opening the SD card drive
on your computer).
• If you are prompted to skip or replace
certain les with identical names, click
Replace.
• After the les are transferred,
insert the SD card into your
unplugged BeatBuddy.
• Once the SD card is in, power the
BeatBuddy on. Let the rmware
upgrade take place (~20-30 seconds).