User Manual

22
If you have the BeatBuddy plugged
into an amp, any eects on the amp will
aect the sound of BeatBuddy (unless
the BeatBuddy is plugged into your amp’s
AUX jack, then it is ne). So if your amp’s
distortion is on, the beats will sound
distorted. It is highly recommended to
have your amp set to a ‘clean’ neutral
tone for the best sound and use other
eects pedals instead of the amp’s
eects. If you are using BeatBuddy with
other eect pedals, it is recommended
to place BeatBuddy after all of the other
pedals in the eects chain so that the
BeatBuddy’s sound isn’t aected by
your other pedals.
BeatBuddy will never damage your
amp’s speaker through normal use.
Though, if you prefer using your amp
exclusively for your instrument, you
may use a separate amp for BeatBuddy.