User manual

6x6 CONTROLS
Track Clocks
In 6x6, you have six song parts each with six
parallel tracks, for a total of 36 unique tracks.
SINGLE TAP:
●
Stop playback of all tracks
● Resume playback of all
tracks
DOUBLE TAP:
●
Immediately stop playback
of all tracks
HOLD
(when stopped) :
● Delete everything and start
the song over
PLAY/STOP ALL
SINGLE TAP:
●
Select next song part
○ Use Track Action button
to change to selected
song part
HOLD:
●
Open the Mixer
SELECT PART
VOLUME WHEEL
Use the volume wheel to control the master
output volume at any time.
The thin bars on the right show the L and R
input volume levels. If the bars are red you
are clipping and you should lower the
volume of your instrument.
In the Mixer:
You can use the volume
wheel to control the relative volume levels
of each track.
SELECT TRACK TRACK ACTION
SINGLE TAP:
●
Record (if track or song part is blank)
●
Playback recording
●
Overdub
●
Playback overdub
DOUBLE TAP:
●
Mute
○
Single tap to unmute
HOLD:
●
Undo most recent layer
○ Continue to hold: undo 2nd layer
○ If all layers undone: tap to overwrite
track
●
Redo most recent layer
○
Continue to hold: redo overdub
SINGLE TAP:
●
Select next track
New track is currently being recorded
Currently selected track
Track is being overdubbed
Entire track is muted
Overdub is undone
All layers undone
Track not selected
On-screen label text describes the SINGLE
TAP commands of the bottom three buttons
Page 2/2