Quick Start Guide

3
Step 4: Turn On the Freestyle
Step 5: Pair With the Freestyle
Bluetooth
Bluetooth
Singsation Freestyle
Devices
Turn the Volume dial from the OFF position. The
Freestyle announces “Power On,” and starts its
light show.
After 15–30 seconds, the Freestyle announces
“Pairing” and goes to Bluetooth pairing mode to
set up with your Bluetooth device.
Note: The Freestyle’s light show turns on by default when the
Freestyle is on. To turn it o, press the Light button on the top of the
Freestyle.
Make sure your phone’s Bluetooth is turned on.
Select Singsation Freestyle from the available
devices to pair to the speaker.
The speaker announces “Device Connected”
when it’s finished pairing and connecting to
your Bluetooth device.
Note: The process of enabling Bluetooth and connecting varies
from device to device. See your device’s owners manual for more
information and specific instructions.
Freestyle Top
OFF
ON
E+
E-
OFF
ON
E+
E-
If you don’t see Singsation Freestyle in the list of devices available for Bluetooth pairing,
turn the Freestyle o and back on again. Make sure it’s not connected to another
Bluetooth device. After a few seconds, the Freestyle announces “Pairing.”
If you’ve previously paired your phone or other Bluetooth device with the Freestyle, it will
automatically attempt to reconnect to that device when you switch it on. If you want
to pair to a new device, turn o Bluetooth on the device that’s already paired to the
Freestyle. The Freestyle announces “Pairing.”