User Manual

pg. 20

4.2 Programming the Arduino UNO with SingleTact Example

This process outlines how to program the Arduino UNO with SingleTact example firmware.

1. Download and install the Arduino Software from: https://www.arduino.cc/en/Main/Software

2. Download the Arduino firmware (ExampleArduinoInterface) from: www.singletact.com

3. Connect the Arduino to the PC using the supplied USB cable.

4. Open the Arduino IDE software:

Figure 11 Arduino - PC connection

Note: USB communication may need additional driver installation from Arduino software package.

See https://www.arduino.cc/en/Guide/Windows#toc4 for further information.

Follow the step-by-step instructions.

1. Go to File --->Open and open “SingleTactDemo.ino”

2. Go to Sketch --->Include Library --->Add .zip Library and select “Timer1.zip”

3. Go to Sketch --->Verify/Compile.

4. Go to Sketch --- > Upload*.

*Note: If you receive an error on Upload make sure the Arduino is selected under Tools --->Port.

UNO

USB Interface (Arduino Uno)

USB Cable