Operator's Manual

Page 4
S556 InstaScan Scanner
The S556 InstaScan Scanner is designed for applications or
configurations that require the scanner to be a considerable
distance from Dura-labels, or where a high volume of Dura-
labels are required to be read simultaneously. Conveyor Belt
applications are ideally suited to the scanner.
The scanner provides six pairs of coaxial connectors for
supporting up to six external antennas. Each antenna plugs into
its own set of connectors on the back panel of the scanner.
Figure 2 shows the S556 InstaScan Scanner.
Figure 2. S556 InstaScan Scanner